1998 FORD WINDSTAR oil

292
*
[MC15700(ALL)01/96]
7-1/2 pica art:0040201-A
Battery recycling symbol
*
[MC15800(ALL)02/96]
RWARNING
The gases around the battery can explode if exposed to
flames, sparks, or lit cigarettes. An explosion could result
in injury or vehicle damage.
%*
[MC15900(ALL)05/96
]
RWARNING
Batteries contain sulfuric acid which burns skin, eyes,
and clothing.
*
[MC16000(ALL)02/96]
If the acid touches someone's skin, eyes, or clothing,
immediately flush the area with water for at least 15 minutes. If
someone swallows the acid, have him or her drink lots of milk
or water first, then Milk of Magnesia, a beaten egg, or vegetable
oil. Call a doctor immediately.
%*
[MC16100(ALL)02/96
]
RWARNING
Applying too much pressure on the ends when lifting a
battery could cause acid to spill. Lift the battery with a
carrier or with your hands on the opposite corners.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996

308
*
[MC30500(ALL)01/96]
RWARNING
Do not park, idle, or drive your vehicle in dry grass or
other dry ground cover. The emission system heats up
the engine compartment and exhaust system, which can
start a fire.
*
[MC30600(ALL)01/96]
RWARNING
Do not remove the floor carpet in your vehicle. Emission
controls cause high exhaust temperatures under the floor.
*
[MC30700(ALL)05/96]
RWARNING
Exhaust leaks may result in the entry of harmful and
potentially lethal fumes into the passenger compartment.
Under extreme conditions excessive exhaust temperatures
could damage the fuel system, the interior floor covering,
or other vehicle components, possibly causing a fire.
*
[MC30900(ALL)01/96]
Watch for fluid leaks, strange odors, smoke and loss of oil
pressure. Also watch for the charge warning light, the check
engine light, or the temperature warning light. These sometimes
indicate that the emission system is not working properly.
*
[MC31000(ALL)01/96]
Do not make any unauthorized changes to your vehicle or
engine. Changes that cause more unburned fuel to reach the
exhaust system can increase the temperature of the engine or
exhaust system.
*
[MC31100(ALL)01/96]
By law, anyone who manufactures, repairs, services, sells, leases
vehicles, trades vehicles, or supervises a fleet of vehicles is not
permitted to intentionally remove an emission control device or
prevent it from working. In some of the United States and in
Canada, vehicle owners may be liable if their emission control
device is removed or is prevented from working.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996

Maintenance and Care
311
%*
[MC34100(ALL)01/96]
The alignment of your headlamps should be checked if:
*
[MC34200(ALL)01/96]
n
oncoming motorists frequently signal you to turn off your
vehicle's high beams when you do not have the high beams
on
*
[MC34300(ALL)01/96]
n
the headlamps do not seem to give you enough light to see
clearly at night
*
[MC34400(ALL)01/96]
n
the headlamp beams are not pointed slightly down and to
the right
% [MC34500(ALL)04/96]
Replacing the Headlamp Bulb
*
[MC34600(ALL)03/96]
The headlamps on your vehicle use replaceable bulbs. When the
lamp burns out, simply replace the bulb, rather than the whole
lamp.
*
[MC34700(ALL)01/96]
RWARNING
Handle a halogen headlamp bulb carefully and keep out
of children's reach. Grasp the bulb only by its plastic
base and do not touch the glass. The oil from your hand
could cause the bulb to break the next time the
headlamps are operated.
*
[MC34800(ALL)01/96]
Do not remove the burned out bulb unless you can immediately
replace it with a new one. If a bulb is removed for an extended
period of time, contaminants may enter the headlamp and affect
its performance.
[MC34900(ALL)04/96]
To remove the headlamp bulb:
*
[MC35000(ALL)01/96]1.
Make sure that the engine is off and the headlamp switch on
the instrument panel is in the OFF position.
[MC35100(ALL)01/96]2.
Lift the hood and locate the headlamp bulb installed in the
rear of the headlamp. Remove the electrical connector from
the bulb by pulling the connector away from the bulb
assembly.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996

320
%*
[MC39800(ALL)01/96]
Cleaning Chrome and Aluminum Parts
*
[MC39900(ALL)12/95]
Wash chrome and aluminum parts with a mild detergent. Do
not use steel wool, abrasive cleaners, fuel, or strong detergents.
%*
[MC40000(ALL)01/96]
Cleaning Plastic Parts
*
[MC40100(ALL)01/96]
Some of your vehicle's exterior trim parts are plastic. Clean with
a tar and road oil remover if necessary. Use a vinyl cleaner for
routine cleaning.
*
[MC40200(ALL)01/96]
Do not clean plastic parts with thinners, solvents or
petroleum-based cleaners.
%*
[MC40300(ALL)01/96
]
If you have your vehicle rustproofed, remove oversprayed
rustproofing with a tar and road oil remover. If rustproofing is
not removed from plastic and rubber parts, it can cause
deterioration.
%*
[MC40400(ALL)02/96]
Cleaning the Safety Belts
*
[MC40500(ALL)02/96]
Clean the safety belts with any mild soap solution that is
recommended for cleaning upholstery or carpets. Do not bleach
or dye the belt webbing because this may weaken it.
*
[MC40600(ALL)01/96]
Your Built-In Child Seat may be cleaned with mild soap and
water. Do not use household cleaners as they may weaken the
webbing or damage the plastic parts. For your convenience, the
liner can be removed, machine-washed, and air-dried.
*
[MC40700(ALL)05/96]
Cleaning the Instrument Panel Lens
*
[MC40800(ALL)01/96]
Clean the instrument panel lens with a soft cloth and a glass
cleaner, such as Ford Ultra-Clear Spray Glass Cleaner, or
equivalent. Do not use paper towel or any abrasive cleaner to
clean the lens as these may cause scratches.
%*
[MC40900(ALL)01/96]
Cleaning the Exterior Lamps
*
[MC41000(ALL)01/96]
Do not use dry paper towel, chemical solvents or abrasive
cleaners to clean the lamps, as these may cause scratches or
crack the lamps.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996

322
%*
[MC41900(ALL)03/96]
Cleaning the Wheels
*
[MC42000(ALL)03/96]
Wash the wheels with the same detergent you use to wash your
vehicle's body. Do not use acid-based wheel cleaners, steel wool,
abrasives, fuel, or strong detergents. These substances will
damage protective coatings. Use tar and road oil remover to
remove grease and tar.
*
[MC24300(ALL)08/96]
Your vehicle was not designed to use fuel containing
manganese-based additives such as MMT. Additionally, vehicles
certified to California emission standards (indicated on the
underhood Vehicle Emissions Control Information label) are
designed to operate on California reformulated gasolines. If
California reformulated gasoline is not available when you
refuel, your vehicle can be operated on non-California fuels.
However, even though your engine will perform adequately on
other gasolines, the performance of the emission control devices
and systems may be adversely affected. Repair of damage
caused by using a fuel that your vehicle was not designed for
may not be covered by your warranty.
*
[MC24500(ALL)08/96]
Your vehicle is designed to useregulargasoline with an
(R+M)/2 octane rating of 87. We do not recommend gasolines
labeled as ºregularª in high altitude areas that are sold with
octane ratings of 86 or even less.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996

Capacities and Specifications
Motorcraft Parts
ComponentPart Number3.0L3.8LAir filterFA-1043FA-1616Battery
StandardBXT-59BXT-65-650 OptionalBXT-65-650
BXT-65-750***BXT-65-750Fuel filterFG-872FG-872Oil filterFL-400SFL-400SSpark plug*AWSF-32PP**AWSF-42EE****PCV valveEV-155EV-152* Torque to 7-15 ft.lb (9.5-20 N·m)
** If any spark plug needs to be removed for examination, each spark plug removed must
be reinstalled in the same cylinder. Cyliners #1, #2, and #3 have a “PG” suffix.
Cylinders #4, #5, and #6 have a “P” suffix. If any spark plug needs to be replaced, use
only spark plugs with the service part number suffix letters “PP” as shown on the
engine decal.
*** Required for dual A/C 3.0L.
**** If any spark plug needs to be removed for examination, each spark plug removed must
be reinstalled in the same cylinder. Cyliners #1, #2, and #3 have a “EG” suffix.
Cylinders #4, #5, and #6 have a “E” suffix. If any spark plug needs to be replaced, use
only spark plugs with the service part number suffix letters “EE” as shown on the
engine decal.

Refill Capacities
Engine3.0L3.8LComponentU.S.MetricU.S.MetricCooling System
Without rear heater
With rear heater12.0 qts
14.0 qts11.3 liters
13.2 liters12.0 qts
14.0 qts11.3 liters
13.2 litersEngine oil
With filter change
Without filter change4.5 qts
4.0 qts4.3 liters
3.8 liters4.5 qts
4.0 qts4.3 liters
3.8 litersAutomatic transaxle fluid12.25 qts11.6 liters12.25 qts11.6 litersFuel tanks (gallons/liter)
LX/ Premium package
GL (Standard)
(Optional)----
20.0 gals.
--------
75.5 liters
----25 gals.
20 gals.
25 gals.94.6 liters
94.7
75.5 liters
94.6 liters

Lubricant Specifications
ITEMFORD
PART NAMEFORD
PART NO.FORD
SPECIFICATIONBrake Master CylinderFord High
Performance DOT3
Brake FluidC6AZ-19542-ABESA-M6C25-ADoor WeatherstripsSilicone LubricantCOAZ-19553-AAESR-M13P4-AEngine CoolantFord Premium
Cooling System FluidE2FZ-19549-AAESE-M97B44-AEngine OilMotorcraft Super
Premium 5W30XO-5W30-QSPESE-M2C153-F and
API Certification
MarkHood Latch and
Auxiliary Catch, Door
and Liftgate HingesMulti-Purpose
Grease SprayD7AZ-19584-AAESR-M1C159-A
and
ESB-M1C93-APower Steering Pump
ReservoirMotorcraft Type F
Power Steering FluidE6AZ-19582-AAESW-M2C33-FTransaxle Automatic
OverdriveMotorcraft
MERCONÒXT-2-QDX
MERCONÒWheel Bearings, RearMotorcraft Premium
Long Life GreaseXG-1-C or
XG-1-KESA-M1C75-B