Page 284 of 370
![FORD WINDSTAR 1998 1.G Owners Manual Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,00 FORD WINDSTAR 1998 1.G Owners Manual Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,00](/manual-img/11/5414/w960_5414-283.png)
Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,000 miles (80,000 km). It is not
necessary and not recommended to use supplemental coolant
additives in your gasoline powered vehicle. These additives may
harm your engine cooling system. Follow the recommended
service interval for changing your engine coolant.
*
[MC10800(ALL)05/96]
NOTE: When adding to or changing your engine coolant, it is
important to maintain a coolant concentration between
40% (s11ÊF [s24ÊC]) and 60% (s62ÊF [s52ÊC])
depending on your local climate conditions. When
coolant concentration falls below 40%, you will lose
freeze protection; above 60%, your engine may
overheat on a warm day. If coolant concentration is
outside this range, you may lose corrosion and rust
protection for the metals in your engine cooling
system.
[MC10900(ALL)01/96]
NOTE: Do not use an engine coolant that does not meet all
14 requirements of Ford specification ESE-M97B44-A.
The use of a coolant that does not meet the 14
requirements may void your warranty for the engine
cooling system. Use only a premium, nationally
recognized brand name engine coolant.
*
[MC11000(ALL)05/96]
Ford Motor Company expressly authorizes the Ford Rotunda
engine coolant recycling process and chemicals. Use only Ford
Rotunda recycled engine coolant or an equivalent non-Ford
Rotunda recycled engine coolant that is certified by the supplier
to meet Ford specification ESE-M97B44-A.
%*
[MC11100(ALL)05/96
]
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 285 of 370
![FORD WINDSTAR 1998 1.G Owners Manual 286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in FORD WINDSTAR 1998 1.G Owners Manual 286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in](/manual-img/11/5414/w960_5414-284.png)
286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in your engine
that has a protection rating of at leasts20ÊF (s29ÊC).
*
[MC11300(ALL)05/96]
To find out how much engine coolant mixture your vehicle's
coolant system can hold, seeRefill CapacitiesinCapacities and
Specificationschapter.
[MC11400(ALL)01/96]
You may add water by itself only in an emergency, but you
should replace it with a 50/50 mixture of water and coolant as
soon as possible.
*
[MC11500(ALL)05/96]
Have your dealer check the engine cooling system for leaks if
you have to add engine coolant more than once a month, or
you have to add more than a quart (liter) at a time.
%*
[MC11600(ALL)01/96]
Checking Hoses
*
[MC11700(ALL)01/96]
Inspect all engine and heater system hoses for deterioration,
leaks and loose clamps before adding or replacing engine
coolant. Make whatever repairs or replacements are necessary
using Motorcraft parts or their equivalents.
%*
[MC11800(ALL)05/96]
Engine Coolant Drain and Flush
[MC11900(ALL)01/96]
To drain and flush your engine coolant, youMUSTsee your
Ford dealer or refer to the procedure in the service manual.
Failing to do so could result in engine damage.
% [MC12000(ALL)04/96]
Power Steering Fluid
*
[MC12100(ALL)01/96]
Check the level of the power steering fluid at least twice a
year (i.e., every Spring and Fall).
*
[MC12200(ALL)01/96]
To check the level of your power steering fluid:
[MC12300(ALL)01/96]1.
Start the engine and let it run until the power steering fluid
reaches normal operating temperature. The power steering
fluid will reach the right temperature after at least five
minutes of idling or at least one mile (1 km) of driving.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 323 of 370
Refill Capacities
Engine3.0L3.8LComponentU.S.MetricU.S.MetricCooling System
Without rear heater
With rear heater12.0 qts
14.0 qts11.3 liters
13.2 liters12.0 qts
14.0 qts11.3 liters
13.2 litersEngine oil
With filter change
Without filter change4.5 qts
4.0 qts4.3 liters
3.8 liters4.5 qts
4.0 qts4.3 liters
3.8 litersAutomatic transaxle fluid12.25 qts11.6 liters12.25 qts11.6 litersFuel tanks (gallons/liter)
LX/ Premium package
GL (Standard)
(Optional)----
20.0 gals.
--------
75.5 liters
----25 gals.
20 gals.
25 gals.94.6 liters
94.7
75.5 liters
94.6 liters
Page 324 of 370
Lubricant Specifications
ITEMFORD
PART NAMEFORD
PART NO.FORD
SPECIFICATIONBrake Master CylinderFord High
Performance DOT3
Brake FluidC6AZ-19542-ABESA-M6C25-ADoor WeatherstripsSilicone LubricantCOAZ-19553-AAESR-M13P4-AEngine CoolantFord Premium
Cooling System FluidE2FZ-19549-AAESE-M97B44-AEngine OilMotorcraft Super
Premium 5W30XO-5W30-QSPESE-M2C153-F and
API Certification
MarkHood Latch and
Auxiliary Catch, Door
and Liftgate HingesMulti-Purpose
Grease SprayD7AZ-19584-AAESR-M1C159-A
and
ESB-M1C93-APower Steering Pump
ReservoirMotorcraft Type F
Power Steering FluidE6AZ-19582-AAESW-M2C33-FTransaxle Automatic
OverdriveMotorcraft
MERCONÒXT-2-QDX
MERCONÒWheel Bearings, RearMotorcraft Premium
Long Life GreaseXG-1-C or
XG-1-KESA-M1C75-B