1998 CHEVROLET BLAZER lock

Downloaded from www.Manualslib.com manuals search engine 1
Wearin!. safety belt correctly is one of the most important
-2- .. .$ 3 Q $ :' . f' ri' q _.I' ri, ,.e ~ I ..<. v IT0 set the clock on systems without Automatic Tone Control, press 9
I, ares and hold the SEEK right arrow until the correcg

Downloaded from www.Manualslib.com manuals search engine Supplement to the 1998 Chevrolet SlO (with ZR2 Suspension) and
Chevrolet Blazer (with
ZR2 Suspension) Owner’s Manuals
This information should be included with the “Daytime
Running Lamps
(Dm)” information located in
Section 2 in your owner’s manual.
Vehicles built for the U.S. domestic market are not
equipped
with Daytime Running Lamps (DRL).
Part Number 15040820
This information should be included with the “Engine
Compartment Fuse Block” information located in
Section
6 in your owner’s manual.
DRL Not used for Daytime Running Lamps in
vehicles built for the
U.S. domestic market.
“Copyxight General Motors Corporation 1998
All Rights Reserved
1

Downloaded from www.Manualslib.com manuals search engine Vehicle Symbols
These are some of the symbols you may find on your vehicle.
For example,
these symbols
are used on an
original battery:
POSSIBLE A
CAUTION
INJURY
PROTECT EYES BY
SHIELDING
CAUSTIC
BURNS
SPARK
OR ,111,
COULD FLAME
EXPLODE BATTERY
These symbols
are important
for you and
your passengers
whenever your vehicle is
driven:
FASTEN
SEAT
BELTS
POWER
WINDOW
These symbols have
to do with
your lamps:
SIGNALS e
TURN
RUNNING
* 0
DAYTIME . . .
LAMPS "'
FOG LAMPS # 0
These symbols
are on some
of
your controls:
WINDSHIELD
DEFROSTER
WINDOW
DEFOGGER
VENTILATING FAN
These symbols
are used on
warning and
indicator lights:
COOLANT -
TEMP -
BRAKE (a)
h COOLANT
ENGINE OIL
e,
PRESSURE
ANTI-LOCK
(@)
BRAKES
Here are some
other symbols
you may see:
FUSE -%-
I
LIGHTER m
HORN b
SPEAKER
b
FUEL 93
J
V

Downloaded from www.Manualslib.com manuals search engine Seats and Seat Controls
This section tells you about the seats -- how to adjust
them, and fold them
up and down.
Manual Front Seat
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and confuse you, or make you push a pedal when you
don’t
want to. Adjust the driver’s seat only when
the vehicle
is not moving.
Move the lever under the front of the manual seat up to
unlock it. Slide the seat to where you want it. Then
release the lever and try
to move the seat with your body
to make sure the seat
is locked into place.
1-2

Downloaded from www.Manualslib.com manuals search engine Heated Front Seats (If Equipped)
If you have this feature,
the control is located on
the side of the seat. This
feature will quickly heat
the lower cushion and lower back
of the driver
and front passenger seats
for added comfort.
Press the lower part of the switch to turn the heater
on
low. Press the upper part of the switch to turn the heater
on high. Put the switch in the center position to turn the
heater
off.
Reclining Front Seatbacks
Release the lever to lock the seatback where you
want it.
Pull up on the lever and the seat will go to an
upright position.
1-5

Downloaded from www.Manualslib.com manuals search engine Head Restraints
Head restraints are fixed on some models and adjustable
on others. Slide an adjustable head restraint up or down
so that the top of the restraint is closest to the top of
your ears. This position reduces the chance of a neck
injury in a crash.
The head restraints tilt forward and rearward also.
Seatback Latches
The front seatback folds
forward to let people get
into the back seat or to
access the storage area
behind the seat.
To fold the front seatback
forward, rotate the handle
on the side of the seat
rearward and pull the
seatback forward.
To return the seatback to the upright position, push the
seatback all the way back until the latch catches. If the
seatback was reclined before being folded forward, it
will return to the reclined position.
If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
Easy Entry Seat (2-Door Models)
The right front seat of your vehicle makes it easy to get
in and out of the rear seat.
Tilt the right front seatback completely forward and
the whole seat will slide forward.
0 Move the seatback to its original position after
someone gets
into the rear seat area. Then move the
seat rearward
until it locks.
1-7

Downloaded from www.Manualslib.com manuals search engine ’ /d CAUTION: I
I
If an easy entry right front seat isn’t locked, it
can move. In a sudden stop or crash, the person
sitting there could be injured. After you’ve used
it, be sure to push rearward
on an easy entry seat
to be sure it is locked.
0 Tilt the seatback completely forward again to
get out.
Rear Seats
Your vehicle has a’folding rear seat which lets you fold
the seatbacks down for more cargo space. The rear seat release handles are
on the rear of the
seatbacks. Push back on the seatbacks as you pull up
on the handles. The head restraint will automatically
fold out of the way when the seatback is folded down.
To raise the seatbacks, just lift up the seatbacks and
push until they lock in the upright position. Push and
pull on the seatbacks to check that the latches have
locked in the upright position. If they haven’t, have
them fixed immediately.
1-8

Downloaded from www.Manualslib.com manuals search engine To return the head restraints to the upright position,
reach behind the seats and pull the head restraint up
until
it locks into position.
On two-door models with an inside mounted spare tire,
the driver’s side rear seat head restraint must be lifted
and held upright as the seatback is raised. Otherwise, the
head restraint will hit the spare tire and prevent the
seatback from properly latching.
Push and pull on the head restraints to check that they
have locked in the upright position. If they haven’t, have
them fixed immediately.
The rear seat head restraints are adjustable. Push the
button located under the head restraint to raise or lower
it. Slide the head restraint up or down
so that the top of
the head restraint is closest to the top of your ears. After
releasing the button, push and pull
on the head restraint
to make sure it’s locked in place.