40-40
CAUTION!
The guide link must be removed from the wheel bearing housing in order
to be able to remove the bolt mounting the suspension strut to the track
control link. - Remove nut -1- and bolt, then pull both links -2- upward and out.
- Swivel wheel bearing housing aside in direction of arrow.
Do not use a chisel (or similar) to widen the slots in the wheel
bearing housing. Do not loosen bolts -3- and -4-. Otherwise, the wheel alignment
must be checked.
- If necessary, counterhold ball joint using 4 mm hex wrench.
Note:
Be careful not to damage the boot. - Unscrew nut for guide link ball joint and press out ball joint.
Pa
ge 3 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4
40-41
Notes: - Remove bolt -1- mounting suspension strut to lower track control link.
- Remove suspension strut downward.
When removing the suspension strut, make sure that the CV joint boot
is not damaged. Servicing suspension strut page 40
-44
.
Pa
ge 4 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4
