66-22
Rocker panel cover, removing
and installing (S4)
1 -
Hex nut
1 Nm
2 -
Retaining strip Adhesive surfaces must be free of dust and
grease before pressing on retaining strip. Self-adhesive, remove protective foil just
prior to assembly.
- Use hot air gun to warm retaining strip to
approx. 40 C (max 50 C) before
assembly.
- Center retaining strip using one hollow
rivet at the front and one at the rear.
- Press complete surface of retaining strip
securely into adhesive areas at sill.
- Rivet retaining strip to sill, starting at
front and moving toward rear.
Pa
ge 1 of 6 Rocker
panel cover, removin
g and installin
g (S4
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.66.11
