87-26
High pressure service valve assembly
Notes: A - Service valve connection (located on condenser inlet line)
B - Schrader valve insert
C - O-ring seal
D - Cap with seal
Only a high pressure service valve is used for A/C system servicing. A
low pressure service valve is not installed in the A/C system. Perform
all A/C system service operations (i.e discharging, evacuating, and
charging) through the high pressure service valve only. Use only the specified R-134a quick coupling connectors when
servicing the refrigerant system. Before removing the valve insert from the high pressure service valve,
discharge refrigerant system page 87
-201
.
Always reinstall cap -D- over service valve.Illustration shows the condenser from an Audi 100 model.
Pa
ge 6 of 13 Refri
gerant s
ystem
(R-134a
), com
ponents
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.6
