87-168
- Remove bolts -A-.
- Disconnect all electrical connections from instrument panel harness to
heater/air conditioner assembly.
Notes on installation: - Remove bolts -A-.
- Remove heater/air conditioner assembly towards passenger side.
- Install in reverse order of removal.
Replace all damaged heater/air conditioner assembly seals.Replace all removed cable tie wraps in the same location.Always replace evaporator inlet/outlet O-rings.Ensure refrigerant lines fit into evaporator without binding.Check evaporator line and heater core bulkhead grommets for correct
fit. Check evaporator drain and evaporator drain valve for correct fit (1996
page 87
-169
; 1997 page 87
-171
).
Pa
ge 21 of 24 Heatin
g and ventilation s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.22
