Page 34 of 38
19-31
Installing
Installation is carried out in the reverse order of
removal; note the following:
- Install front bumper:
Repair Manual, Body Exterior, Repair Group
63
- Top up coolant Page 19
-7 .
Vehicles with automatic transmission:
- Attach ATF lines.
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37
- Check ATF level:
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37
Tightening torques
Pa
ge 34 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
Page 35 of 38
Component
Nm
Condenser to radiator 10
Cooling lines to radiator 10
Hose clamps for coolant hoses 2
Pa
ge 35 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
Page 37 of 38
19-33
Test requirements:
Engine at operating temperature.
WARNING!
Hot steam can escape when opening the cap
on the expansion tank: Cover cap with a cloth
and open carefully.
- Open cover of coolant expansion tank
Testing pressure relief valve in filler cap - Install tester VAG 1274 with adapter VAG 1274/8 onto expansion tank.
- Using hand pump on tester, build up a pressure of approx. 1.0 bar.
- If this pressure is not maintained, locate and repair leaks.
Pa
ge 37 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
