01-108
Work step 12: Diagnostic of tank seal
Test requirements
Engine running at idle:
Intake Air Temperature (IAT) less than 95
C display group 004, display field 4.
Coolant temperature at least 80 C
Display group 4, display field 3
Fuel filler cap opened briefly (to reduce
pressure).
Basic Settin
g
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -7- and -1- to select "display group number 071" and
press -Q- button to confirm input.
System in Basic Setting 71
1
2
3
4
When indicated on display:
Notes:
Test lasts approx. 90 seconds.When the diagnostic of tank seal is performed several times in a row,
the fuel filler cap must be opened briefly before each test to release
pressure.
Pa
ge 42 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
01-110
Work step 13: Diagnostic of Secondary Air
Injection (AIR) system
Test requirement
Engine running at idle:
Note:
During diagnostic of the Secondary Air Injection
(AIR) system, the Secondary Air Injection (AIR)
pump will run for several seconds.
Basic Setting
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -7- and -7- to select "display group number 077" and
press -Q- button to confirm input.
System in Basic Setting 77
1
2
3
4
When indicated on display:
Note:
Secondary Air Injection (AIR) system test lasts approx. 60 seconds. - Check specified value in display field 4 after indication "Test ON"
appears:
Pa
ge 44 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
