Page 9 of 61
24-87
- Check oxygen sensor control in display fields 1
to 4:
Display fields
1 2 3 4
Display Group 33: Oxygen sensor control at idle speed
Display
xx.x %
xx.x V
xx.x %
xx.x V
Indicates
Oxygen sensor control,
bank 1 Oxygen sensor voltage,
bank 1 Oxygen sensor control,
bank 2 Oxygen sensor voltage,
bank 2
Work range
min.: -25.0 %
max.: 25.0 % min.: 0.000 Volt
max.: 1.000 Volt min.: -25.0 %
max.: 25.0 % min.: 0.000 Volt
max.: 1.000 Volt
Specification
-4.0 to 4.0 %
(The value must
fluctuate by 2 %) Between 0.000 and
1.000 V the voltage
should fluctuate -4.0 to 4.0 %
(The value must
fluctuate by 2 %) Between 0.000 and
1.000 V the voltage
should fluctuate
Note
If readout does not
match specification
Page 24
-89
If readout does not
match specification
Page 24
-92
If readout does not
match specification
Page 24
-89
If readout does not
match specification
Page 24
-92
- Press button -C-.
- Press buttons -0-, -3- and -3- to select "display
group number 033" and confirm entry with -Q-
button.
Pa
ge 9 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 10 of 61
24-88
System in Basic Setting 32
1
2
3
4
Indicated on display: (1 - 4 display fields) - Check oxygen sensor control in display fields 1 to
4:
Display fields
1 2 3 4
Display Group 32: Oxygen sensor adaptation at idle speed
Display
xx.x %
x.xxx %
xx.x %
x.xxx %
Indicates
Oxygen sensor
adaptation value, bank
1, sensor 1 at idle
(additive) Oxygen sensor
adaptation value, bank
1, sensor 1 at partial
throttle (multiple) Oxygen sensor
adaptation value, bank
2, sensor 1 at idle
(additive) Oxygen sensor
adaptation value, bank 2,
sensor 1 at partial throttle
(multiple)
Range
min.: -25.0 %
max.: 25.0 % min.: -25.0 %
max.: 25.0 % min.: -25.0 %
max.: 25.0 % min.: -25.0 %
max.: 25.0 %
Specification
-4.0 and 4.0 %
can fluctuate slightly -4.0 and 4.0 %
can fluctuate slightly -4.0 and 4.0 %
can fluctuate slightly -4.0 and 4.0 %
can fluctuate slightly
Note
If readout does not
match specification
Page 24
-90
and Page
24
-91
If readout does not
match specification
Page 24
-90
and Page
24
-91
If readout does not
match specification
Page 24
-90
and Page
24
-91
If readout does not
match specification
Page 24
-90
and Page
24
-91
Pa
ge 10 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 11 of 61
24-89
If the specified values in display fields 1
and/or 3 do not match the specifications, or if
the readout does not fluctuate by at least 2
%:
- Check oxygen sensor heater Page 24
-114
.
- Check oxygen sensor signal wire and activation
Page 24
-122
.
- Check intake system for leaks and eliminate
false air Page 24
-76
.
- Check fuel pressure regulator Page 24
-33
.
- Fuel return line kinked or plugged.
-
Press button.
- Press button -0- and -6- to select function "End
Output" and confirm with -Q- button.
- Switch ignition off.
Pa
ge 11 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 12 of 61
24-90
Evaluation display group 032 Display group 32
Display fields: 1/3
Possible cause
Corrective action
Oxygen sensor adaptation
values in range:
-4.0 to -25.0 %
Oil thinning- Carry out oil change or carry out
road test on highway
Display fields: 2/4
High oil consumption
Oxygen sensor adaptation
values in range:
-4.0 to -25.0 % Mass Air Flow (MAF) Sensor faulty- Check Mass Air Flow (MAF) Sensor
Page 24
-59
EVAP canister purge regulator valve remains in
stuck in open position - Check EVAP canister purge
regulator valve Page 24
-134
Fuel pressure too highFuel return line kinked or pluged- Check fuel pressure regulator
Page 24
-33
- Check fuel return line
Fuel injector leaking- Check fuel injectors Page 24
-39
Pa
ge 12 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 13 of 61
24-91
Evaluation display group 032 Display Group 32
Display fields: 1/3
Possible cause
Corrective action
Oxygen sensor adaptation
values in range:
4.0 and 25.0 %
Un-metered air in intake area- Check intake system for un-metered
air and eliminate leaks
Display field: 2/4
Fuel pressure too low- Check fuel pressure regulator Page
24
-33
Oxygen sensor adaptation
values in range:
4.0 - 25.0 %
Oxygen sensor heater faulty- Check oxygen sensor heater Page
24
-114
Injector not opening or only opening partially - Check injectors Page 24
-39
EVAP canister purge regulator valve remains
in stuck in open position - Check EVAP canister purge
regulator valve Page 24
-134
Pa
ge 13 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 14 of 61
24-92
Evaluation display group 33 Display Group
33
Display field:
2/4
Possible cause
Corrective action
Approx. 0.450
V
Open circuit in wire 4 between oxygen sensor and
control module - Check signal wire and activation Page 24
-
122
Open circuit in wire 3 between oxygen sensor and
control module
Oxygen sensor heater faulty
Oxygen sensor faulty- Check oxygen sensor heater Page 24
-114
- Replace oxygen sensor
More than
1.100 V
Short to B+ in wire 4 between oxygen sensor and
control module - Check oxygen sensor wiring, bank 1, sensor
1 Page 24
-123
Less than
0.100 V
Short to Ground (GND) in wire 4 between oxygen
sensor and control module - Check oxygen sensor wiring, bank 2, sensor
1 Page 24
-127
Pa
ge 14 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 15 of 61
24-93
Oxygen sensors aging, oxygen sensor
before catalytic converter, checking
Test requirements
Coolant temperature min. 85 C (185 F)
(Display group 004, display field 3)
Test sequence for oxygen sensor 1 before
catalytic converter bank 1
- Connect vehicle diagnostic, testing and
information system VAS5051 or VAG1551 and
select engine electronics control module by
entering address word "01" Page 01
-9. When
doing this the engine must be at idle.
Pa
ge 15 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
Page 16 of 61
24-94
Rapid data transfer
HELP
Select function XX
Indicated on display
- Press buttons -0- and -4- to select "Basic Setting" and confirm with -Q-
button.
Basic Setting
Q
Input displa
y group number XXX
Indicated on display
Test requirements - Press -0-, -3- and -4- to select "display group number 034" and confirm
with -Q- button.
Engine runs at 1900 - 2200 RPM
System in Basic Setting 34
1
2
3
4
Indicated on display
- Continue test as soon as display field 4 indicates "Test ON".
Pa
ge 16 of 61 Ox
yg
en sensor control, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.2
