01-9
Vehicle diagnostic, testing and
information system VAS5051 or
VAG1551, connecting and selecting
functions
Requirements
Fuses for engine electronics OK
Fuel pump relay OK
Battery voltage at least 11 V
Ground (GND) connection for engine and
transmission OK
- Switch ignition off.
Note:
The Data Link Connector (DLC) is located below the dash, to the left of
the steering column. - Connect vehicle diagnostic, testing and information system VAS5051
with VAS5051/1 diagnostic cable. As an alternative, connect VAG1551
scan tool with VAG1551/3B diagnostic cable.
Pa
ge 11 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1
01-77
Test requirements
Fuses for engine electronics OK
Fuel pump relay OK
- Connect vehicle diagnostic, testing and
information system VAS 5051 or VAG1551 scan
tool and select engine electronics control
module by entering address word "01" Page 01
-9 . When doing this the ignition must be
switched on.
Rapid data transfer
HELP
Select function XX
Indicated on display
- Press buttons -0- and -3- to select function "Output Diagnostic Test
Mode."
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode
Indicated on display
Pa
ge 95 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1
