17-14
- Mark direction of rotation of ribbed belt.
Note:
Mark direction of rotation of ribbed belt. The belt can break if it runs in the
opposite direction when reinstalled. - To slacken ribbed belt, turn to the right using a 17 mm ring spanner
until the two holes are aligned with each other -arrow- and hold in
position with mandrel 3204.
- Take off ribbed belt.
- Disconnect water hoses -1- and -2-.
- Remove coolant reservoir (arrows).
- Disconnect connector for coolant level monitor.
- Remove cover panel from cylinder head cover (cylinder bank 4-6).
Pa
ge 14 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1
