1998 AUDI A4 lock

28-39

Display Group 24 -Ignition- Knock control

Driving mode
Read measuring value block
24
Indicated on display

xx.x RPM x.x %
xx.x KW
xx.x KW



1 2
3 4
Display fields
Specified value
Evaluation


Ignition timing retard via knock control:
cylinder 6 0...12 KW
(crankshaft
angle)
Page 28
-40




Ignition timing retard via knock control:
cylinder 5
0...12 KW
(crankshaft
angle)
Page 28
-40



Engine load 15 - 175 %

Engine speed RPM
750 - 6800 RPM

Note:
The displayed digit values in display fields 3 and 4 reflects the actual "ignition timing retard" via knock control from cylinders 5
and 6. The ignition timing retard occurs via KW (crankshaft angle).
Pa
ge 44 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-50
If all the test results so far have been OK but a
malfunction related to the camshaft position
sensor (Hall sensor) is displayed again after
erasing the DTC memory as a test measure, the
following might be the cause:

- Rotor ring (trigger wheel) for camshaft position
sensor (Hall sensor) misaligned; test phase
position.

Checking phase position of Hall sensor

- Connect vehicle diagnostic, testing and
information system VAS5051 or VAG1551 scan
tool and select engine electronics control
module by entering address word "01" Page
01
-9 . When doing this the engine must be
idling.
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select function "Read Measuring Value
Block" and confirm entry with -Q- button.
Read Measurin
g Value Block
Input displa
y group number XXX

Indicated on display:
- Press buttons -0-, -9- and -3- to select "Display Group 093" and
confirm entry with -Q- button.
Pa
ge 57 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-51

Read Measuring Value Block 93
1
2
3
4

Indicated on display
- Check specified display values for Hall sensors.

Display fields

1 2 3 4
Display Group 093: Phase positions of Hall sensors (Bank 1 and Bank 2) with engine idling
Display xxx RPM xx %
0 6 KW
0 6 KW
Indicates Engine
speed
(RPM) Engine
load Phase position
Bank 1 Phase position
Bank 2
Work
range min.: 750
RPM
max.: 6800
RPM min.: 15
%
max.:
175 % -20.3 to 14.8 KW
-20.3 to 14.8 KW
Specified
value 750 - 850
RPM
0 6 KW
0 6 KW
Note
If readouts do not match specifications, unbolt Hall sensor and check whether
rotor ring is properly mounted on camshaft. If it is incorrectly mounted, the
locating lug will be flattened when the securing bolt is tightened. Also check
valve timing.
Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB,
Repair Group 13, Crankcase ventilation, Ribbed belt removing and installing, Timing belt removing and installing

Pa
ge 58 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-52

Misfire recognition, checking


Test sequence

- Connect vehicle diagnostic, testing and
information system VAS5051 or VAG1551 scan
tool and select engine electronics control
module by entering address word "01" Page
01
-9 . When doing this the engine must be at
idle.
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select function "Read Measuring Value
Block" and confirm entry with -Q- button.
Read Measurin
g Value Block
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -1- and -4- to select "Display Group 014" and
confirm entry with -Q- button.
Read Measuring Value Block 14
1
2
3
4

Indicated on display
- Check misfire recognition.
Pa
ge 59 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-53


Display fields

1 2 3 4
Display Group 014: Misfire recognition
Display xxx / RPM xxx %
xxx
---
Indicated Engine speed
(RPM) Load
Sum of misfire
Misfire
recognition
Work range min.: 750 /
RPM
max.:
6800 /RPM min.: 0
max.:
100
activated
locked
Specified
value 650 - 720 /
RPM 15.0 -
22.0 % 0 - 15
activated
Note --- ---
If specified value is not reached: Evaluation display field
3 Page 28
-54
see also page Page 28
-55

---
If specified value is reached:

-
Press button.Rapid Data Transfer
HELP
Select function XX

Indicated on display (select function)
Pa
ge 60 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-55
The following measuring value blocks display misfiring of individual cylinders:

Display fields

1 2 3 4
Display Group 015: Misfire recognition from cylinder 1, 2 and 3
Display
xxx
xxx
xxx
---
Indicates
Amount of
misfires
cylinder 1 Amount of
misfires
cylinder 2 Amount of misfires
cylinder 3 Misfire
recognition
Work range

activated
locked
Specified
value 0...15
0...15
0...15 activated
Note
If specification is obtained: Evaluation
Page 28
-57
.
--- Pa
ge 62 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-56


Display fields

1 2 3 4
Display Group 015: Misfire recognition from cylinder 4, 5 and 6
Display
xxx
xxx
xxx
---
Indicates
Amount of
misfires
cylinder 4 Amount of
misfires
cylinder 5 Amount of misfires
cylinder 6 Misfire
recognition
Work range

activated
locked
Specified
value 0...15
0...15
0...15 activated
Note
If specification is obtained: Evaluation
Page 28
-57
.
--- Pa
ge 63 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1

28-57
Evaluation display groups 015 and 016 Display field: 1,2 and 3 from measuring
value block 15 and 16
Possible cause
Corrective action
greater 15
Spark plug faultySpark plug connector faulty Ignition coil or power output stage
faulty - Check spark plug and ignition
cable with connector
- Check ignition coil Page 28
-5 .
- Check power output stages
Page 28
-11


Fuel injector faultyCheck compression of one or
more cylinder weak - Check fuel injectors Page 24
-39
- Check compression pressure
Pa
ge 64 of 64 I
gnition s
ystem, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.28.1