13-34
Note:
Before installing the transmission, check that the dowel sleeves for
locating engine/transmission are fitted in the engine flange.
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 37
- Measure distance -a- at three points and calculate average value.
Distance -a- = approx. 12.3 mm.
- Install a different shim if necessary.
- Install transmission.
Pa
ge 21 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2
13-38
Cylinder bores, checking
Piston and cylinder dimensions
Note:
Replacement pistons are only available with basic dimension. - Measure bores at three points in both directions: across engine -A- and
in line with crankshaft -B-.
Use internal dial gauge 50 to 100 mm.
Difference between actual and nominal diameter: not more than
0.08 mm.
Honing dimension
Piston dia.
Cyl. bore dia.
Basic dimension 80.95 mm 81.01 mm
Pa
ge 25 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2
