34-23
All models
Note:
Take care not to damage protective coating on drive axles. - Remove engine speed (RPM) sensor -G28- on left of transmission
(arrow) and move clear to side.
- Disconnect drive axles from flange shafts and rest them on suspension
links.
- Disconnect harness connector from Vehicle Speed Sensor (VSS) (arrow
-A-).
- Disconnect back-up light harness connector (multi-function switch)
(arrow -B-).
- Disconnect all other electrical connections and Ground (GND) wires
from transmission and from engine/transmission mounting bolts.
Pa
ge 6 of 20 Transmission, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.2
