01-276
- For all test steps, switch ignition off, disconnect multi-pin connector for
Transmission Control Module (TCM) -J217- (located in front of
passenger seat under carpet in foot well page 01
-11
) and connect
VAG1598/20 adapter to wiring harness connector.
- If measuring values do not match specifications, follow instructions in
right-hand column of test table (labelled "Corrective action") page
01
-11
.
- Always perform all steps indicated in the "Corrective action" column.
- Only perform test steps recommended in the DTC table (selective
troubleshooting).
Pa
ge 6 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16
01-313
3. Wiring from Transmission Control Module
(TCM) -J217- to Multi-function Transmission
Range (TR) switch -F125- (8-pin connector),
checking
- Switch off ignition.
- Disconnect connector from TCM -J217-, located in front of right seat
under the cover in the footwell page 01
-20
.
- Connect test box VAG 1598/20 to harness connector.
- Connect both 8-pin connectors -2- to multi-function switch -F125- as
shown in the illustration.
- Use multi-meter VAG 1526A or Vehicle Diagnosis, Measuring and
Information System VAS 5051
Pa
ge 62 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16
