1997 VOLKSWAGEN PASSAT ECU

[x] Cancel search: ECU

Page 226 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-30
   
14 - Outer wheel bearing 
15 - Hex nut  Adjusting wheel 
bearing play  Using a screwdriver it 
must be possible to 
move the thrust

Page 229 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-33
     
Brake pads, removing and installing  
    
Note:  
    Mark brake pads when removing if they are to be 
reused. Re-install in their

Page 231 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-35
     
- Secure brake caliper housing with new self-
locking bolts.     Note:  - Attach parking brake cable (arrow) to brake caliper housi

Page 235 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-39
     The parking brake cable is secured by clamps to the 
axle beam in the center of the two colored marks 
(arrow).  Fig. 1 Parking brak

Page 236 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-40
     Fig. 3 Center console, removing - Remove rear ashtray (center console). - Remove console rear securing screws (arrows). Page 4 of 9P

Page 237 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-41
   
Brake pedal/brake servo, 
removing and installing  
CAUTION! 
The brake pedal travel must 
not be restricted by 
additional floor cov

Page 239 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-43
   
16 - Securing clip  Ensure seated 
securely 
17 - Brake Light Switch  Adjusting  Page 46-45 Page 7 of 9Parking brake lever assembly o

Page 240 of 369

VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 46-44
     
Brake pedal, removing and installing  
    
Note:  
     Grease all mounting and contact surfaces with 
MoS
2 grease. 
     To remo
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >