Downloaded from www.Manualslib.com manuals search engine 48-80
Installing Note:
Apply one drop only in 2nd thread of rack. If too much
D6 is used the release torque when next
disassembling will be too high. No D6 must get onto
steering rack. - Adjust new tie rod to length Page 48-84 . - Coat tapped hole thread with D6 locking fluid
(arrow).
- Tighten tie rod to the specified torque, 70 Nm (52 ft lb). Always use a torque wrench. Page 80 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
Downloaded from www.Manualslib.com manuals search engine 48-90
Power steering vane
pump, removing and
installing (vehicles with 4-
Cyl. engines)
Note: Always replace self-locking
nuts and bolts. Pumps supplied as spare
parts are not filled with
hydraulic oil. Fill the pump with G 002 000 hydraulic oil and rotate it by hand, otherwise the pump may be damaged or noisy during
operation. Do not reuse drained
hydraulic oil.
1 - Suction hose
2 - Pressure hose
3 - Hose clamp
4 - Tensioning bolt Tensioning V-belts
item 11 Page 90 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
