18
ADJUSTING SEAT POSITION
Pull the lock release lever up. Then
slide the seat to the desired position
with slight body pressure and release
the lever.
ADJUSTING SEATBACK ANGLE
Lean forward and pull the lock release
lever. Then lean back to the desired
angle and release the lever.
CAUTION!
To reduce the risk of sliding under
the lap belt during a collision, avoid
reclining the seatback any more than
needed. The seat belts provide maxi-
mum protection in a frontal or rear
collision when the driver and the
passenger are sitting up straight and
well back in the seats. If you are re-
clined, the lap belt may slide past
your hips and apply restraint forces
directly to the abdomen. Therefore,
in the event of a frontal collision, the risk of personal injury may increase
with increasing recline of the seat- back.
ÐAdjusting front seats
(power type)
ÐAdjusting front seats(manual type)
19
ADJUSTING SEAT POSITION
Move the control switch to the desired direction. Releasing the switch will stop the move in
that position.
Do not place anything under the front
seats. It might interfere with the seat movement.
ADJUSTING SEATBACK ANGLE
Move the control switch to the desired direction. Releasing the switch will stop the move in
that position.
CAUTION!
To reduce the risk of sliding under
the lap belt during a collision, avoid
reclining the seatback any more
than needed. The seat belts provide maximum protection when the driv-
er and the passenger are sitting up
straight and well back in the seats. If
you are reclined, the lap belt may
slide past your hips and apply re- straint forces directly to the abdo-
men. Therefore, in the event of a for- mal collision, the risk of personal in-
jury may increase with increasing re-
cline of the seatback. ADJUSTING SEAT CUSHION ANGLE
AND HEIGHT
Move the control switch to the desired direction. Releasing the switch will stop the move in
that position.
ADJUSTING
DRIVER'S SEAT LUMBER
SUPPORT
Releasing the swi tch will stop the move in
that position.
ADJUSTING DRIVER'S SEAT SIDE SUPPORT
Turn the knob either way. To fold or remove the rear seats, operate
the seats as illustrated below. Reverse
the porcedure to return them. Be sure to
follow every indicated step exactly.
CAUTION!
Any operations should not be made while the vehicle is moving.
When fastening the holding strap
to secure the seat, adjust the strap
length so that the seat will not
swing back (1)
When retruning seats to their origi-
nal position: Make sure the seat belts are not twisted or caught under the seat and are arranged in their proper position for ready use. Make sure the seat is securely locked by pushing forward and
rearward on the top of the seatback
or by trying to pull up the edge of
the bottom cushion.
Folding up or removing the seats will en-
large the luggage compartment. See
Luggage stowage precautionsº in Part 2 for precautions to observe in loading lug- gage.
Rear seatsÐ ÐRear seat precautions
