Downloaded from www.Manualslib.com manuals search engine Removing and Installing Engine10
Edition 11.96
- Unplug connector from the Hall sender (G40)
-arrow-.
- Unplug connector from the intake manifold
temperature sender (G72) -1-.
- Detach connection hose -2- to the intake hose -5-.
- Detach vacuum hose -3- to the brake servo unit at the throttle valve control unit (J338).
- Detach vent hose -4- to the activated char- coal filter.
- Detach connection hose -6-.
- Remove intake hose -5- between top part of air filter and throttle valve control unit (J338).
- Unplug connector -1- from the air mass me-
ter (G70).
- Slacken the securing bolts -2- and remove air filter housing -3-.
