Downloaded from www.Manualslib.com manuals search engine
20Fuel Supply System
Edition 08.96
- Pay attention to installation position:
Marking on the flange should be aligned with the marking on the fuel tank -arrows-.
Blue return flow pipe -1- to connectionwith marking -R-.
Black feed pipe -2- to connection with marking -V-.
Removing and installing fuel gauge sender
Removing
- Remove fuel delivery unit page 20-5.
- Release connector tabs of cables -3- and -4-
and unplug.
- Use a screwdriver to lift the retaining tabs -1- and -2- and pull fuel gauge sender down
and off -arrow-.
Installing
- Insert fuel gauge sender into the guides at the fuel delivery unit and push up until it locks in place.
Removing and installing fuel tank
Pay attention to safety precautions page 20-4.
Pay attention to rules for cleanliness page
20-4 Special tools, testers and aids required Engine/gearbox jack (e.g. V.A.G 1383 A)
Fuel extraction unit (e.g. V.A.G 1433 A)
