1997 PONTIAC FIREBIRD door lock

Last Door Closed Locking and
Lockout Prevention
Your vehicle comes with this feature set in Mode 2. This
means that your power door locks will not lock when
the keys are in the ignition and a door is open. To
change the factory setting, do the following:
1. Press the LOCK switch on the door.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for.
3. Press the LOCK switch on the door until you hear
the number
of chimes that correspond to the mode
selection you want.
Mode 1: Both O€€ (Doors will 1ocWunlock when you
press the power door lock switch).
Mode 2: Lockout Prevention Only (If you leave your
keys in the ignition and get out the driver’s door, you
won’t be able
to lock the doors with the power door
lock switch).
Mode 3: Last Door Closed Locking Only (If the power
door lock switch is used to lock the vehicle while any
door is open, you will hear three chimes. The doors will
not lock until after all doors are closed).
Mode 4: Both On (This combines Mode 2 and 3).
Remote Keyless Entry Lock Verification
Your vehicle comes with this feature set in Mode 5. This
means that when you
use the key chain transmitter to
lockhnlock your vehicle, your parking lamps will flash
briefly upon the first push
on LOCK. Your horn will
sound briefly, your parking lamps will flash briefly upon
the second push on LOCK and your parking lamps will
flash briefly upon any push on UNLOCK.
To change the
factory setting, do the following:
1. Press the UNLOCK switch on the Remote Keyless
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
Entry transmitter.
3. Press the UNLOCK switch on the Remote Keyless
Entry transmitter until you hear the number
of
chimes that correspond to the mode selection
you want.
2-19

Mode 1: All Off (The headlamps will not flash and the
horn will not sound
to provide you feedback that a
lock/ud~& command has been received by the Remote
Lock Control transmitter).
Mode 2: Horn and LampdLamps (Your horn will sound
briefly and your parking lamps will flash when you
press
LOCK on the key chain transmitter. Only your
parking lamps will flash when you press
UNLOCK).
Mode 3: Horn and Lamps (Your horn will sound briefly
and your parking lamps will flash every time you push
LOCK and
UNLOCK).
Mode 4: Lamps (Your parking lamps will flash every
time
you push LOCK and UNLOCK),
Mode 5: Lamps/Horn and Lamps/Lamps (Your
lamps will flash
upon the first push on LOCK, your
lamps will flask and
your horn will sound upon the
second push on
LOCK and your lamps will flash upon
any push on
UNLOCK).
Theft-Detlerrent Arming Method
Your vehicle comes with this feature set in Mode 3. This
means that both your key chain transmitter and the
power door lock switch will actively arm the system.
To
change the factory setting, do the following:
1. Press the UNLOCK switch on the door.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for,
3. Press the UNLOCK switch on the door until you
hear the number
of chimes that correspond to the
mode selection
you want.
Mode I: Alarm System Off (The system will not arm).
Mode 2: Key Chain Transmitter Lock (When you lock
your doors using the Key Chain Transmitter, the system
will arm itself).
Mode 3: Key Chain TransmittedPower Door Lock
Switch
(If you use either the Key Chain Transmitter or
the power door
lock switch to lock the doors, the system
will arm itself).
Mode 4: Passive arming and Remote Lock Control
Transmitter/Power Door Lock Switch Arming
(The
system will arm itself after all doors are closed plus
arming per;mg&
3).
2-20

Theft-Deterrent Arming Verification
Your vehicle comes with this feature set in Mode 3. This
means that if you arm the system using the key chain
transmitter, your parking lamps will flash and your horn
will chirp twice to verify that the system is armed. If it
only chirps once, the hatch is open or unlatched. If you
arm the
system using either the power door lock switch
or by passive arming, only the parking lamps will flash
for verification. To change the factory setting, do
the following:
1. Press the LOCK switch on the key chain transmitter.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
3. Press the LOCK switch on the key chain transmitter
until you hear the number of chimes that correspond
to the mode selection
you want.
Mode 1: All Off (No horn chirps or parking lamp flash).
Mode 2: Horn and Lamps (Your parking lamps will
flash and your horn will chirp twice to verify the system
is armed using any arming method).
Mode 3: Horn and Lamps/Lamps (If you use the key
chain transmitter to arm the system, your parking lamps
will flash and your horn will chirp twice to verify that
the system is armed. If you use either the power door
lock switch or passive arming, only your lamps will
flash for verification).
Mode 4: Lamps (When your vehicle arms, only your
parking lamps will flash for verification).
2-21

If you have an automatic transmission, the ignition
switch can’t be turned to
LOCK unless the shift lever is
in the PARK (P) position.
OFF (C): Unlocks the steering wheel, ignition and
automatic transmission, but does not send electrical
power to any accessories. Use this position if your
vehicle
must be pushed or towed. A warning tone will
sound if you open the driver’s door when the ignition is
in OFF and the key is in the ignition.
RUN (D): Position to which the switch returns after you
start your engine and release the switch. The switch
stays in the
RUN position when the engine is running,
But even when the engine is not running, you can
use RUN to operate your electrical power accessories
and to display some instrument panel warning and
indicator lights.
START (E): Starts the engine. When the engine starts,
release the key. The ignition switch will return to RUN
€or normal driving.
Note that even if the engine is not running, ACC and
RUN allow you to operate your electrical accessories,
such
as the radio and ventilation fan.
Key Release Button
If you have a manual
transmission, your ignition
lock has a key release
button.
You must press the
button before you can take
your key out
of the
ignition
lock.
On manual transmission vehicles, turn g the key
to
LOCK will lock the steering column and result
in a loss
of ability to steer the vehicle. This could
cause
a collision. If you need to turn the engine
off while the vehicle is moving, turn the key only
to OFF. Don’t press the key release button while
the vehicle
is moving.
2-24

Windows
Manual Windows
Rotate the window crank handle to open and close each
door
window.
Power Windows (If Equipped)
With power windows, switches on the door control each
window when
the ignition is on or when RAP is present.
(See “Retained Accessory P’ower’’ in the Index.) You
can open the passenger’s window any amount by
pressing the switch and releasing it when the window
has lowered to the position
you want.
The switch for the driver’s window has an express-down
feature. Quickly press and release the switch for the
driver’s window and the window will lower completely.
You can also open the driver’s window any
amount by
pressing the switch again while the window is in the
express-down mode when
it has lowered to the position
you want.
Horn
To sound the horn, press either horn symbol on your
steering wheel.
If your horn sounds two or three chirps when unlocking
your vehicle with the transmitter (if you have that
option), the alarm was triggered while
you were away.
Check the vehicle before entering.
2-43

Headlamp Doors
The headlamp doors are designed to open when you turn
the headlamps on and close when you turn the
headlamps off. The headlamp doors can be opened
without turning
on the headlamps by turning the
headlamps on, then turning the switch back
to the
parking lamps position. The headlamp doors should
be open when
driving in
icy or snowy conditions to prevent the doors from
freezing closed and when washing the vehicle to help
clean the headlamps.
You can open the headlamp doors manually:
1. Open the hood.
2. Remove the plastic cover from the retractor
motor knob.
3. Turn the retractor motor knob counterclockwise until
the headlamp door
is fully open. The knob will get
harder
to turn when the headlamp door is all the
way up.
motor
knob.
4. Replace the plastic cover on the retractor
To manually close the headlamp doors, turn the lamps
o€€ and turn the knob clockwise. If the headlamp doors
aren’t working properly, see your Pontiac dealer
for help.
2-52

Interior Lamps
Instrument Panel Brightness Control
This switch controls the brightness of your
instrument panel lights. Turn the switch upward
to
brighten or dim the lights, If you turn the switch all the
way up, your courtesy lamps will come on.
Courtesy Lamps
When any door is opened, several interior lamps go on.
These lamps are courtesy lamps. They make
it easier for
you
to enter and leave your vehicle.
Courtesy lamps include the dome lamp and other lamps
throughout the interior
of your vehicle.
To prevent battery rundown, your interior lamps will be
disabled about
10 minutes after the ignition is turned to
OFF. The 10 minute timer will be restarted if you do any
of the following;
1, Turn the ignition on.
2. Open either door.
3. Press any button on your Remote. Lock
Control transmitter.
4. Turn the int’erior lamp switch from off to on.
5. Open the hatch.
Delayed Illumination
With delayed illumination, the courtesy lamps will stay
on for
25 seconds after you close the doors when
entering the vehicle. They will stay
on for five seconds
after you close the doors when exiting the vehicle. The
times will
be shortened if the ignition is turned to the
RUN position or if the power locks are activated. To
turn this feature on or off, see “Feature Customizatian”
in the Index.
Exit Lighting
With exit lighting, the interior lamps will come on when
you remove the key from the ignition
to help you see
while exiting the vehicle.
To turn this feature on or off,
see “Feature Customization” in the Index,
2-54

Front Map Lamps
Your inside rearview mirror includes two map lamps.
Each lamp has its own switch. Use the switch closest to
the lamp to turn it on. The lamps will also
go on when a
door
is opened.
Retained Accessory Power (RAP)
Your vehicle is equipped with a Retained Accessory
Power (RAP) feature which will allow certain features
of your vehicle to continue to work up to
10 minutes
after the ignition key is turned to
OFF.
Your convertible top, power windows, and audio system
will work when the ignition key is in the
RUN or ACC
positions. Once the key is turned from RUN to OFF,
these features will continue to work for up to 10 minutes
or until either door is opened.
Your power door unlock and remote hatch release
features will work when the ignition key is in the RUN
or
ACC positions or if either door is open. Once the key
is turned to OFF, these features will continue to work €or
up to 10 minutes. If either door is open and the ignition
key
is OFF, these features will continue to work until
both doors have been closed for about
30 seconds or
until the theft-deterrent system arms. At that time, both
the power door unlock and remote hatch release features
will be disabled to enhance the security
of the vehicle.
The power door lock function will work at all times
except during Lockout Prevention (if this feature is
enabled). See “Lockout Prevention’’ in
the Index.
2-55