1997 OLDSMOBILE SILHOUETTE maintenance

4.
5.
6.
Replace the filters by reversing Step 3. Make sure
the filters are inserted
so that the sealing foam is
angled
in the same direction on both filters. For the
type of filter to use,
see “Normal Replacement Parts”
in the Index.
Close the inner access door, while squeezing the tab,
to be sure
it is tightly closed.
Snap the outer access panel
into the back of the
glove box.
Automatic Transaxle Fluid
When to Check and Change
A good time to check your automatic transaxle fluid
level
is when the engine oil is changed.
Change both the fluid and filter every 50,000 miles
(83 000 km) if the vehicle is mainly driven under one
or more
of these conditions:
0 In heavy city traffic where the outside temperature
regularly reaches
90°F (32°C) or higher.
0 In hilly or mountainous terrain.
When doing frequent trailer towing.
Uses such as found in taxi, police or delivery service
If you do not use your vehicle under any of these
conditions, the fluid and filter do not require changing.
See “Scheduled Maintenance Services”
in the Index.
6-17
ProCarManuals.com

How to Add Fluid Engine Coolant
Refer to the Maintenance Schedule to determine what
kind
of transaxle fluid to use. See “Recommended
Fluids and Lubricants” in
the Index.
If the fluid level is low, add only enough of the proper
fluid to bring
the level into the cross-hatched area on
the dipstick.
1. Pull out the dipstick.
2. Using a long-neck funnel, add enough fluid at the
dipstick hole
to bring it to the proper level.
It doesn’t take much fluid, generally less than one pint
(0.5 L). Don% overfill. We recommend you use only
fluid labeled DEXRON@-111, because fluid with that label
is made especially for your automatic transaxle.
Damage caused by fluid other than DEXRON-111
is
not covered by your new vehicle warranty.
3. After adding fluid, recheck the fluid level as described under “How to Check.”
4. When the correct fluid level is obtained, push the
dipstick back in all the way. The cooling
system in your vehicle is filled with new
DEX-COOL
TM (silicate-free) engine coolant. This
coolant
is designed to remain in your vehicle for 5 years
or 150,000 miles
(240 000 km), whichever occurs first.
The following explains your cooling system and how to
add coolant when it is low. If you have a problem with
engine overheating, see “Engine Overheating” in
the Index.
A 50/50 mixture of water and the proper coolant for
your Oldsmobile will:
Give freezing protection down to -34°F (-37°C).
0 Give boiling protection up to 265°F (129°C).
Protect against rust and corrosion.
0 Help keep the proper engine temperature.
Let the warning lights and gages work as they should.
6-20
ProCarManuals.com

When to Check Power Steering Fluid
It is not necessary to regularly check power steering
fluid unless you suspect there
is a leak in the system or
you hear an unusual noise. A fluid loss in this system
could indicate
a problem. Have the system inspected
and repaired.
How To Check Power Steering Fluid
When the engine compartment is cool, unscrew the cap
and wipe the dipstick with
a clean rag. Replace the cap
and completely tighten
it. Then remove the cap again
and look at the fluid level on the dipstick.
When the engine compartment is hot,
the level should be
at the
H mark. When it’s cold, the level should be at the
C mark. If the fluid is at the ADD mark, you should
add fluid.
What to Use
Refer to the Maintenance Schedule to determine what
kind of fluid to use. See “Recommended Fluids and
Lubricants”
in the Index. Always use the proper fluid.
Failure to use the proper fluid can cause leaks and
damage hoses and seals.
Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use.
If you will be
operating your vehicle
in an area where the temperature
may Pall below freezing, use
a fluid that has sufficient
protection against freezing.
Adding Washer Fluid
The windshield washer
fluid reservoir is located
on the passenger’s side of
the vehicle, near the fuse
6-25
ProCarManuals.com

Tire Inspection and Rotation
Tires should be rotated every 6,000 to 8,000 miles
(10 000 to 13 000 km). Any time you notice unusual
wear, rotate your tires
as soon as possible and check
wheel alignment. Also check for damaged tires or
wheels. See “When It’s Time for New Tires” and
“Wheel Replacement” later
in this section for
more information.
The purpose of regular rotation is
to achieve more
uniform wear for all tires on the vehicle. The first
rotation is the most important. See “Scheduled
Maintenance Services”
in the Index for scheduled
rotation intervals. When
rotating
your tires, always use the correct rotation
pattern shown here.
Don’t include the compact spare tire
in your tire rotation.
After the tires have been rotated, adjust the front and rear
inflation pressures
as shown on the Certificatioflire label.
Make certain that all wheel
nuts are properly tightened.
See “Wheel Nut Torque”
in the Index.
Rust or dirt on
a wheel, or on the parts to which
it is fastened, can make wheel nuts become loose
after
a time. The wheel could come off and cause
an accident. When you change a wheel, remove
any rust or dirt from places where the wheel
attaches to the vehicle. In an emergency, you can
use
a cloth or a paper towel to do this; but be
sure to use
a scraper or wire brush later, if you
need to, to get
all the rust or dirt off. (See
“Changing a Flat Tire” in the Index.)
6-41
ProCarManuals.com

Underbody Maintenance
Chemicals used for ice and snow removal and dust
control can collect on the underbody.
If these are not
removed, accelerated corrosion (rust) can occur on
the underbody parts such
as fuel lines, frame, floor
pan and exhaust system even though they have
corrosion protection.
At least every spring, flush these materials from
the
underbody with plain water. Clean any areas where mud
and other debris can collect. Dirt packed
in closed areas
of
the frame should be loosened before being flushed.
Your retailer or an underbody car washing system can
do this for you.
Chemical Paint Spotting
Some weather and atmospheric conditions can create a
chemical fallout. Airborne pollutants can fall upon and
attack painted surfaces on your vehicle. This damage
can take two forms: blotchy, ringlet-shaped
discolorations, and small irregular dark spots etched
into the paint surface.
Although no defect
in the paint job causes this,
Oldsmobile
will repair, at no charge to the owner, the
surfaces of new vehicles damaged by this fallout
condition within 12 months or 12,000 miles (20 000
km)
of purchase, whichever occurs first.
6-53
ProCarManuals.com

Engine Specifications
Engine VTN Code ........................... E
EngineType .............................. V6
Firing Order
...................... 1-2-3-4-5-6
Horsepower
............................. I85
Thermostat Temperature
Specification
................... 195°F (91 “C)
Vehicle Dimensions - Long Wheel Base
Length ...................... 201.3” (51 1.5 cm)
Width
........................ 72.0” (1 83.0 cm)
Height
........................ 68.1’’ (1 73.1 cm)
Wheelbase
.................... 120” (304.7 cm)
Front Tread Width
............. 6 1.5” ( 1 56.2 cm)
Rear Tread Width
............. 63.3” ( 160.8 cm)
Vehicle Dimensions - Short Wheel Base
Length ...................... 187.4” (475.9 cm)
Width
........................ 72.0” (1 83.0 cm)
Height
........................ 67.4” (171.2 cm)
Wheelbase
.................... 1 12” (284.5 cm)
Front Tread Width
............. 6 1 Sf‘ ( 156.2 cm)
Rear Tread Width ............. 63.3” ( 160.8 cm)
Normal Maintenance Replacement Parts
Air Cleaner Filter .............. AC Type A-974C
Pollen Filter
(2) ..................... 52470574
Engine
Oil Filter ........................ PF47
Spark Plugs
................... AC Type 41-940
Gap: 0.060 ” (1.52 mm)
Windshield Wiper Blades Length
........................ 24” (600 mm)
Type ......................... Shepard’s Hook
Length ........................ 16” (406 mm)
Type
......................... Shepard’s Hook
Backglass Wiper
Blade
6-63
ProCarManuals.com

Section 7 Maintenance Schedule
Owner Checks at Each Fuel Fill-up
What to Check at Least Once a Month
What to Check at Least Twice a Year
What to Check at Least Once
a Year
Periodic Maintenance Inspections
Recommended Fluids and Lubricants
Tips for Keeping Track of Maintenance
A Place to Record Maintenance Procedures
This section covers the maintenance required for your Oldsmobile\
.
Your vehicle needs these services to retain its
safety, dependability and emission control performance.
7-2 Introduction to Your Maintenance Schedule
7-37
7-2
Your Vehicle and the Environment 7-37
7-3 How this Section is Organized
7-43
7-5 Short
TripKity Definition 7-41
7-4 Selecting
the Right Schedule for Your Vehicle 7-38
7-4 Using
Your Maintenance Schedule 7-38
7-45
7-5 Short
Trip/City Intervals
7-6 Long Tripmighway Definition
7-6 Long Tripmighway Intervals 7-45
ProCarManuals.com

I IMPORTANT: I
KEEP ENGINE OIL
AT THE PROPER
LEVEL AND CHANGE AS
RECOMMENDED
protection Plan I
Have you purchased the GM Protection Plm? The Plan
supplements your new vehicle warrmties. See your
Warranty and Owner Assistance booklet, or your
Oldmobile retailer
for details.
Introduction
Your Vehicle and the Environment
Proper vehicle maintenance not only helps to keep your
vehicle
in good working condition, but also helps the
environment.
All recommended maintenance procedures
are important. Improper vehicle maintenance can
even
affect the quality of the air we breathe. Improper fluid
levels or the wrong tire inflation can increase the
level
of emissions from your vehicle. To help protect our
environment, and to keep your vehicle
in good
condition, please maintain your vehicle properly.
7-2
ProCarManuals.com