To turn on the EATC
Press AUTO or any of
the six manual override
buttons along the
bottom of the control.
The control will
operate only when the
ignition is turned to the
ON position.
To turn off the EATC
Press OFF. When the
system is off, the
display window will be
blank (dark).
Automatic operation
Press AUTO and select the desired temperature.
The system will automatically determine fan speed
and airflow location. Fan speed remains automatic
unless you press FAN. The selected temperature will
be shown on the display.
Temperature selection
TEMP will increase or
decrease the set
temperature. Pressing
TEMP will change the
temperature one
degree in either
direction. Pressing and
holding TEMP will
rapidly change the temperature (in one degree
increments) in either direction until either 18ÉC
(65ÉF) or 29ÉC (85ÉF). The temperature will then
jump ±15ÉC (5ÉF) and stop at either 16ÉC (60ÉF)
which is maximum cooling or 32ÉC (90ÉF) which is
maximum heating.
TEMP
—+OFFAUTOTEMPOUT
SIDEA/C MAXF-DEF
R-DEFVENT
AUTO
AUTO F—+
TEMP
—+OFFAUTOTEMPOUT
SIDEA/C MAXF-DEF
R-DEFVENT
OFF
—+
TEMP
—+OFFAUTOTEMPOUT
SIDEA/C MAXF-DEF
R-DEF
AUTO
VENT
TEMP
F—+
—+
Controls and features
17
