CHECKING AND ADDING
ENGINE OIL
Use WSS-M2C153-F motor oil
CERTIFIED FOR GASOLINE
ENGINES by the American
Petroleum Institute.
Engine oils with an SAE 5W±30
viscosity and displaying the
American Petroleum Institute
certification mark are preferred for
your vehicle. They provide the best
engine performance, fuel economy
and engine protection for all
climates down to ±25ÉC (±15ÉF).
Do not use:
²ªnon-detergentº oils
²oils labeled API SA, SB, SC, SD,
SE, SF, or SG
²additional engine oil additives,
oil treatments or engine
treatments
Additional engine oil additives, oil
treatments, or engine treatments
are never needed and could, under
certain conditions, lead to engine
damage which is not covered by
your Ford warranty.
Synthetic engine oils which are
CERTIFIED and of the preferred
viscosity may be used in your
engine. The engine oil and oil filter
must still be changed according to
theService Guide.
Maintenance and care
140
MOTORCRAFT PART NUMBERS
Component Motorcraft part number
Spark plug
1AWSF-32EE*
Air filter FA-1641
Fuel filter FG-872
Oil filter FL-1A
Battery BXT-65-650 or BXT-65-850 (optional)
P.C.V. valve EV-152
1Refer to Vehicle Emission Control Information Decal for spark plug and
gap specifications.
*If any spark plug needs to be removed for examination, each spark plug
removed must be reinstalled in the same cylinder. Cylinders 1-4 have an
ªEGº suffix. Cylinders 5-8 have an ªEº suffix. If any spark plug needs to
be replaced, use only spark plugs with the service part number suffix
letters ªEEº as shown on the engine decal.
REFILL CAPACITIES
Fluid Component Capacity
Brake fluid Brake master
cylinderFill to line in
reservoir
1
Engine coolant Engine coolant
recovery reservoir
and radiator13.5 L (12.8 qts.)
Engine oil 5.0 L (302 c.i.d.) 4.7 L (5.0 qts.)
2
Fuel 4-door 79.5 L (21.0 gal)
Front axle Dana 35 front axle 1.7 L (3.5 pts.)
1
Power steering fluid Power steering fluid
reservoirFill to line in
reservoir1
Rear axle Ford conventional
and Traction Lok 8.82.6 L (5.5 pts.)1
Capacities and specifications
185
