1997 Mercury Mountaineer child seat

[x] Cancel search: child seat

Page 85 of 197

Mercury Mountaineer 1997  Owners Manuals 7. Insert the left and right safety
belt tongues into the left and right
slots of the crotch buckle. Verify
that the indicator window on each
tongue is green to ensure proper
safety belt connections.

Page 86 of 197

Mercury Mountaineer 1997  Owners Manuals 9. Pull on the safety belt tongues
to ensure they are both securely
latched. If they are not latched,
repeat Steps 7 and 8.
If necessary, the shoulder belts can
be put in automatic locking mode
(ALR)

Page 87 of 197

Mercury Mountaineer 1997  Owners Manuals 2. Allow the shoulder belts to fully
retract.
Removing your child from the
built-in child seat
1. Disconnect the chest clip by
squeezing the release tabs together
and pulling the two sides apart.
2. P

Page 88 of 197

Mercury Mountaineer 1997  Owners Manuals 7. Press firmly on the top center of
the built-in child seat head
restraint to ensure it is stowed
properly.
Inspecting the built-in child seat
after a collision
All built-in child restraints,
includi

Page 184 of 197

Mercury Mountaineer 1997  Owners Manuals Cleaning the built-in child seat
Clean the built-in child seat with
mild soap and water. Do not use
household cleaning products
because they may weaken the
safety belt webbing or damage the
vinyl part

Page 193 of 197

Mercury Mountaineer 1997  Owners Manuals Air bag supplemental restraint
system ............71,74,75,76,77,82,87
and child safety
seats .......................74,76,77,82,87
description ................................73
indicator light .....
Page:   < prev 1-8 9-16 17-24