1997 Mercury Mountaineer audio

Press the SHUFFLE button to
listen to tracks on the current
CD(s) in a random order.
Random order play continues until
the button is pressed again.
Clock
Press the CLK button to display
the time on the audio system
display.
Time is displayed:
²until an audio function button is
pressed.
²approximately ten seconds after
each audio system change.
²when the audio system is off
and the ignition is ON.
To remove the clock display, press
the CLK button again.
To display the time momentarily
when the vehicle is turned off,
press the CLK button.
COMP
5SHUFFLE
6
COMP
5SHUFFLE
6
AUTO
SET CLK
CLK
Controls and features
15

Setting the clock
Press and hold the CLK button to
set the hour:
Press
to increase hours and
press
to decrease hours.
Press and hold CLK to set the
minute.
Press
to increase minutes and
press
to decrease minutes.
Blank skip function
Press this control to toggle the
BLANK SKIP function on and off.
When the function is activated, the
audio system will automatically
skip over any blank (silent)
passages in the playing cassette
tape. When the function is
deactivated, the audio system will
play the blank portion of the
cassette tape.
DSP function
Press the DSP control to activate
DSP effect. To scroll through the
available DSP effects, press
.
Select these available DSP
AUTO
SET CLK
SEEK
TUNE
DISCS


SCAN

SEEKAUTOSET
AUTO
SET CLK
SEEK
TUNE
DISCS


TAPE

CD

TUNE
DISCS
DSP

BLANK
SKIP



DSP

BLANK
SKIP



Controls and features
16

DISPLAY
The display screen gives
information on the status of the
audio system.
Display Information
AM, FM1, FM2 Indicates current radio frequency
band
87.9 to 107.9/530 to 1610 Indicates currently playing radio
station
STIndicates stereo operation
Illuminated bars Indicates volume, relative level of
bass and treble, and relative levels
of speaker balance and fade
TAPE Indicates tape is playing
SC Indicates tape is scanning
AUTO Indicates autoset function
activation
AUTO OFF Indicates autoset function is off
NO TAPE Indicates no tape in player when
tape select button is pushed
Indicates DolbytNoise Reduction
activation
Indicates tape play
1 or 2 Indicates side of tape playing
Indicates tape is rewinding or fast
forwarding
CD-## Indicates CD number playing
(e.g., CD-01, CD-02, etc.)
TR-## Indicates CD track number
playing (e.g., TR-01, TR-02, etc.)
Display
21

structure (out of its ªshadowº)
returns your reception to
normal.
²Station overload. Weak stations
are sometimes captured by
stronger stations when you pass
a broadcast tower. A stronger
station may temporarily
overtake a weaker station and
play while the weak station
frequency is displayed.
The audio system automatically
switches to single channel
reception if it will improve the
reception of a station normally
received in stereo.
Radio frequency information
27

Refer to theWarranty Guidefor
audio system warranty information.
If service is necessary, see your
dealer.
Warranties and service
28