1997 Mercury Mercury Cougar headlamp

145
Starting
%*
[TO00200( ALL)01/96]
Fuel-Injected Engines
*
[TO00300( ALL)01/96]
When starting a fuel-injected engine,the most
important thing to remember is to avoid
pressing down on the accelerator before or
during starting. Only use the accelerator when
you have problems getting your vehicle started.
SeeStarting Your Enginein this chapter for
details about when to use the accelerator while
you start your vehicle.
*
[TO00400( ALL)01/96]
Starting Your Vehicle
%*
[TO00500( ALL)01/96]
Preparing to Start Your Vehicle
*
[TO00600( ALL)02/96]
RWARNING
Do not start your vehicle in a closed
garage or in other enclosed areas. Exhaust
fumes can be toxic. Always open the
garage door before you start the engine.
*
[TO00700( ALL)01/96]
Before you start your vehicle, do the following:
*
[TO00800( ALL)01/96]
1. Make sure all occupants in the vehicle
buckle their safety belts. SeeSafety Restraints
in the Index for more details.
*
[TO00900( ALL)01/96]
2. Make sure the headlamps and other
accessories are turned off when starting.
*
[TO01200( BCGV)01/96]
3. Make sure that the gearshift is in P (Park)
and the parking brake is set before you turn
the key.
File:08rctoc.ex
Update:Thu May 30 10:28:08 1996

243
%*
[MC41200( ALL)03/96]
Lights and Bulb Replacement
*
[MC41300( ALL)01/96]
It is a good idea to check the operation of the
following lights frequently:
*
[MC41400( ALL)01/96]
q
headlamps
*
[MC41500( ALL)01/96]
q
tail lamps
*
[MC41600( ALL)01/96]
q
brakelamps
*
[MC41700( ALL)01/96]
q
hazard flasher
*
[MC41800( ALL)01/96]
q
high-mount brakelamp
*
[MC41900( ALL)01/96]
q
turn signals
*
[MC42100( ALL)05/96]
q
license plate lamps
%*
[MC42300( ALL)01/96]
The alignment of your headlamps should be
checked if:
*
[MC42400( ALL)01/96]
q
oncoming motorists frequently signal you to
turn off your vehicle's high beams when you
do not have the high beams on
*
[MC42500( ALL)01/96]
q
the headlamps do not seem to give you
enough light to see clearly at night
*
[MC42600( ALL)01/96]
q
the headlamp beams are pointed substantially
away from a position slightly down and to
the right
File:11rcmcc.ex
Update:Mon Jun 3 09:27:52 1996

244 %
*
[MC42700( ALL)01/96]
Headlamp Bulb
*
[MC42800( ALL)03/96]
The headlamps on your vehicle use replaceable
bulbs. When the lamp burns out, simply replace
the bulb, rather than the whole lamp.
*
[MC42900( ALL)01/96]
RWARNING
Handle a halogen headlamp bulb carefully
and keep out of children's reach. Grasp
the bulb only by its plastic base and do
not touch the glass. The oil from your
hand could cause the bulb to break the
next time the headlamps are operated.
*
[MC43000( ALL)01/96]
Do not remove the burned-out bulb unless you
can immediately replace it with a new one. If a
bulb is removed for an extended period of time,
contaminants may enter the headlamp housing
and affect its performance.
[MC43100( BC )12/95]
half page art:0010431-A
Parts of a headlamp
File:11rcmcc.ex
Update:Mon Jun 3 09:27:52 1996

245
*
[MC43400( ALL)03/96]
Removing the headlamp bulb
*
[MC43500( ALL)01/96]
1. Make sure that the headlamp switch is in
the OFF position.
*
[MC43800( BC )01/96]
2. Lift the hood and find the bulb in the
headlamp socket.
*
[MC44100( BC )12/95]
3. Remove the electrical connector from the
bulb by grasping the wire with a quick pull
rearward.
*
[MC44300( BC )12/95]
4. Remove the retaining ring by turning it 1/8
of a turn to free it from the socket. Then
slide the ring off the plastic base.Keep the
ring.You must use it again to hold the new
bulb in place.
*
[MC44800( ALL)03/96]
Installing the headlamp bulb
*
[MC45000(MBC )01/96]
1. With the flat side of the bulb's plastic base
facing upward, insert the glass end of the
bulb into the socket. You may need to turn
the bulb left or right to line up the grooves
in the plastic base with the tabs in the
socket. When the grooves are aligned, push
the bulb into the socket until the plastic base
contacts the rear of the socket.
*
[MC45200(MBC )01/96]
2. Slip the bulb retaining ring over the plastic
base until it contacts the rear of the socket.
Lock the ring into the socket by rotating it
clockwise until you feel a ªstop.º
*
[MC45300( ALL)01/96]
3. Push the electrical connector into the rear of
the plastic base until it snaps, locking it into
position.
*
[MC45400(MBC )01/96]
4. Turn the headlamps on and make sure that
they work properly. If the headlamp was
correctly aligned before you changed the
bulb, you should not need to align it again.
File:11rcmcc.ex
Update:Mon Jun 3 09:27:52 1996

296 Index
Anti-theft lug nuts and key........ 189
Anti-theft system
arming the system........... 97
description............... 96
disarming an untriggered system..... 98
disarming a triggered system....... 99
triggering............... 98
warning light.............. 16
Appeals (see Dispute settlement board) . . 266
Assistance (see Customer assistance).... 263
Audio system (see Electronic
sound system)............. 25
Autolamp system (see Headlamps)..... 69
Automatic transmission
driving an automatic overdrive..... 157
fluid, adding............. 224
fluid, checking............ 223
fluid, refill capacities......... 254
fluid, specification........... 255
Axle
lubricant specifications......... 255
refill capacities............ 254
traction lok.............. 154
B
Backing up............... 159
Basic vehicle warranty........... 4
Battery................. 225
acid, treating emergencies....... 192
charging system warning light...... 14
disconnecting............. 226
how to service............ 225
jumping a disabled battery....... 191
maintenance-free........... 225
proper disposal, recycling....... 226
replacement, specifications....... 253
servicing............... 225
File:rcixc.ex
Update:Mon Jun 3 09:28:38 1996

298 Index
Bulbs, replacing............. 243
halogen............... 244
headlamps.............. 244
high-mount brakelamp........ 246
specifications............. 248
C
Canada, customer assistance....... 271
Canada, warranty information....... 4
Canadian Motor Vehicle Arbitration Plan
(CAMVAP).............. 271
Capacities for refilling fluids....... 254
Carbon monoxide in exhaust....... 149
Car seats for children
(see Child safety seats)........ 125
Cassette tape player (see Electronic
sound system)............. 36
Catalytic converter............ 239
CD player (see Electronic sound system) . . . 25
Chains, tires.............. 232
Changing a tire............. 181
Charging system warning light....... 14
Child safety restraints.......... 124
child safety belts........... 142
child safety seats........... 125
Child safety seats............ 125
and air bags............. 125
automatic locking mode
(retractor)...........112, 125
in front seat............. 125
in rear outboard seat......... 125
in rear seat............125, 140
tether anchorage hardware....... 141
Chime
key in ignition............. 74
safety belt............... 12
Circuit breakers
checking and replacing........ 179
see also fuses............. 171
File:rcixc.ex
Update:Mon Jun 3 09:28:38 1996

Index 299
Cleaning your vehicle.......... 249
chrome and aluminum parts...... 250
engine compartment......... 252
exterior............... 249
exterior lamps............ 250
fabric................ 251
headlamps.............. 250
instrument panel.......... 59,251
instrument panel lens......... 251
interior............... 251
interior lamps............ 251
mirrors................ 93
plastic parts............. 250
polishing............... 249
rustproofing............. 250
safety belts.............. 250
tail lamps.............. 250
upholstery and interior trim...... 251
washing............... 249
waxing............... 249
wheels................ 252
Climate control system.......... 59
air conditioning.......... 59,62
heating.............. 59,62
Clock.................. 72
Cold engine starting........... 146
Combination lap and shoulder belts . . . 110
Compact disc player (see Electronic
sound system)........... 26,31
Compact disc radio (see Electronic
sound system)............. 26
Console, description............ 94
Controls
mirrors................ 93
power seat.............. 106
File:rcixc.ex
Update:Mon Jun 3 09:28:38 1996

Index 305
H
Hazard flashers.............. 78
Headlamps
aiming................ 243
autolamp system............ 69
bulb specification........... 248
checking alignment.......... 243
cleaning............... 250
daytime running lights......... 67
flashing................ 76
high beam............... 75
replacing bulbs............ 243
turning on and off........... 68
Head restraints............. 103
Heating
manual heating and air
conditioning system......... 59
semi-automatic system......... 62
High beams
indicator light............. 16
operation............... 75
High-mount brakelamp......... 246
description.............. 246
replacing the bulb.......... 246
Hitch................. 165
Hood................. 204
latch location............. 204
lubrication specifications........ 255
release lever............. 204
working under the hood....... 202
Horn................... 79
Hoses, checking............. 214
File:rcixc.ex
Update:Mon Jun 3 09:28:38 1996