AR40.10-P-1040A
Balance wheels
27.1.95
MODELS
124, 129, 140, 163, 168, 170, 171, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240
MODEL
414
P40.10-0214-01
43a
Balance weight with retaining clip
43b
Adhesive weight
43c
Adhesive weight
P40.10-0215-01
P40.10-0216-01
43d
Balance weight for CTS wheel
43e
Support ring on CTS wheel
Balancing
1.1
Remove balance weight (43a) with retaining
clamp.
Installation tool
*124589176300
1.2
Remove adhesive weight (43b, 43c) with
removal tool
Removal tool
*129589005900
Use adhesive weights on light alloy disk
wheels with cramped installation conditions.
1.3
Remove balance weight for CTS wheel (43d)
from support ring (43e)
With special protection vehicles.
2
Clean wheels if necessary, attach to static
balancing machine and balance to a
maximum of 5 to 10g on each side of the
wheel.
Use recommended balancing machines;
observe manufacturer's instructions.
#
Mounting centering sleeve
AR40.10-P-1040-01A
Centering sleeve
*WH58.30-Z-1003-18A
Model 140, 210
Adjustment value on the balancing machine
for special protection vehicles with CTS
wheels.
AR40.10-P-1040-04A
3
Balance wheels on the vehicle
D
Wheels may only be finish-balanced on the
vehicle after they have been statically
balanced.
D
Vehicle doors must be closed.
D
Balance on steel rims with wheel covers.
D
Drive the rear wheels with the engine only
otherwise the rear axle center assembly will
be damaged.
Use recommended balancing machines;
observe manufacturer's instructions.
#
Type 124.2/3
Balancing on vehicles with 4MATIC
AR40.10-P-1040-02A
Models 124, 129, 140, 170, 202, 208, 210,
except 210.08/28
Balancing on vehicles with ETS, ASR or ESP
AR40.10-P-1040-03A
Copyright DaimlerChrysler AG 06.07.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
