1997 Lexus ES300 brake

STARTING AND DRIVING
142
Cancelling the preset speed
You can cancel the preset speed by either of the following:
a. Pulling the control lever i the ªCANCELº direction.
b. Depressing the brake pedal.
If the vehicle speed falls below about 40 km/h (25 mph), the
preset speed will be automatically cancelled.
If the vehicle speed tops 16 km/h (10 mph) below the preset
speed, the preset speed will also automatically be cancelled.
If the preset speed automatically cancels out for other than
these reasons, have your vehicle checked by your Lexus
dealer at the earliest opportunity.
Resetting to a faster speed
Pressing the control lever upward in the ªRES/ACCº
direction and hold it. Release the lever when the desired
speed is attained. While the lever is held upward, the vehicle
will gradually gain speed.
When the difference between the actual vehicle speed and
the set speed is less than 5 km/h (3 mph), the set speed can
be increased 1.6 km/h (1 mph) each time by pressing the
control lever upward in the ªRES/ACCº direction quickly.
However, a quicker way to reset is to accelerate the vehicle
and then press the control lever downward in the
ªSET/COASTº direction.
Resetting to a slower speed
Press the control lever downward in the ªSET/COASTº
direction and hold it. Release the lever when the desired
speed is attained. While the lever is held downward, the
vehicle speed will gradually decrease.
When the difference between the actual vehicle speed and
the set speed is less than 5 km/h (3 mph), the set speed can
be lowered 1.6 km/h (1 mph) each time by pressing the
control lever downward in the ªSET/COASTº direction
quickly.
However, a quicker way to reset is to depress the brake
pedal and then press the control lever downward in the
ªSET/COASTº direction.
Even if you turn off the overdriveswitch with the cruise
control on, engine braking will not be applied because the
cruise control is not cancelled. To decrease the vehicle
speed, reset to a slower speed with the cruise control lever
or depress the brake pedal. If you use the brake pedal, cruise
control is cancelled.
Resuming the preset speed
If the preset speed is cancelled by pulling the control lever
or by depressing the brake pedal, pushing the lever up in the
ªRES/ACCº direction will restore the speed set prior to
cancellation. However, once the vehicle speed falls below
about 40 km/h (25 mph), the preset speed will not be
resumed.

STARTING AND DRIVING
144
TRACTION CONTROL SYSTEM
The traction control system automatically helps control
the spinning of the front wheels which may occur when
accelerating on slippery road surfaces, thus assisting
driver to control the driver to control the driving power
of the front wheels.
When you turn the ignition switch on, this system
always turns on. Leave the system on during ordinary
driving so that it can operate when needed. When
traction control is applied, the slip indicator light
blinks.
You can turn off the traction control system by pushing
the ªTRAC OFFº switch. The ªTRAC OFFº
indicator/warning light will then come on. Pushing the
ªTRAC OFFº switch a second time turns the system
back on and extingusihes the ªTRAC OFFº
indicator/warning light.
You may hear a slight clicking noise in the engine
compartment when the engine is started. This means that
the traction control system is in the self±check mode, and
does not indicate malfunction. When the traction control
system is operating, you may feel vibation or noise of your
vehicle, caused byoperation of the brakes. This indicates the
system is functioning properly.
When getting the vehicle out of the mud or new snow, etc.
the traction control system will help operate to prevent the
wheels from spinning.

STARTING AND DRIVING
145
Traction control failure warning
If hte ªTRAC OFFº indicator/warning light flashes, contact
your Lexus dealer as soon as possible. There may be
trouble in the traction control system.
CAUTION!
Under certain slippery road conditions, full traction
of the vehicle and power to the front wheels cannot
be maintained, even though the traction control
system is in operation. Do not drive the vehicle
under any speed or maneuvering conditions which
will cause the vehicle to lose traction. In situations
where the road surface is covered with ice or snow,
your vehicle should be fitted with snow tires or tire
chains. Always drive at an appropriate and cautious
pace.
BRAKE SYSTEM
The tandem master cylinder brake system is hydraulic system
with two separate sub±systems. If either sub±system should
fail, the other will still work. However, the pedal will be harder
to press, and your stopping distance will be longer. Also, the
brake system warning light may come on.
CAUTION!
Do not drive your vehicle with only a single brake
system. Have your brakes fixed immediately.
Brake booster
The brake booster uses engine vacuum to power±assist the
brakes. If the engine should quit while you are driving, you can
bring the vehicle to a stop with normal pedal pressure. There
is enough reserve vacuum for one or two stops but no more!
CAUTION!
Do not pump the brake pedal if the engine stalls.
Each push on the pedal uses up your braking
distance will be longer.
Even if the power assist is completely lost, the
brakes will still work. But you will have to push the
pedal hard ± much harder than normal. And your
braking distance will be longer.

STARTING AND DRIVING
146
Anti±lock brake system
The anti±lock brake system is designed to automatically
prevent lock±up of the wheels during a sudden brake or
braking on slippery road surfaces. This assists in
providing directional stability and steering performance
of the vehicle under these circumstances.
The anti±lock brake system becomes operative after the
vehicle has accelerated to a speed in excess of approximately
10 km/h (6 mph). It stops operating when the vehicle
decelerates to a speed below approximately 5 km/h (3 mph).
You may hear a sound in the engine compartment for a few
seconds when the engine is started or just after the vehicle
is started. This means that the anti±lock brake system is in
the self check mode, and does not indicate a malfunction.
Effective way to press the ABS brake pedal: When the
anti±lock brake system function is in action, you may feel
the brake pedal pulsating and hear a noise. In this situa-
tion, to let the anti±lock brake system work for you, just
hold the brake pedal down more firmly. Do not pump the
brake. This will result in reduced braking performance.
The brake pedal pulsation caused by the anti±lock brake
system may indicate hazardous road surface conditions.
Although the anti±lock brake system assists in providing
vehicle control, it is still important to drive with all due care,
because the anti±lock brake system cannot overcome the
laws of physics that act on your vehicle:
Braking capability is dependent on tire friction with the road
surface.
Even though the anti±lock brake system is operating, a
driver cannot maintain full control on certain slippery road
surfaces, when cornering at high speeds, or in violent
maneuvers.
Avoid high speeds on wet roads. The anti±lock brake
system cannot eliminate the risk of hydroplaning and loss
of tire friction.
Always maintain a safe distance from the vehicle in front of
you. Compared with vehicles not fitted with an anti±lock
brake system, your vehicle may require a longer stopping
distance in the following cases:
Driving on rough, gravel or snow±covered roads.
Driving with tire chains installed.
Driving on roads where the road surface is pitted or has
other differences in surface height.

STARTING AND DRIVING
147 ªABSº warning light
This light comes on when the ignition key is turned to
the ªONº position. After about 3 seconds, the light will
turn off.
If either of the following conditions occurs, this indicates a
malfunction somewhere in the parts monitored by the
warning light system. Contact your Lexus dealer as soon as
possible to service the vehicle.
The light does not come on as described above, or remains
on.
The light comse on while driving.
Even if the anti±lock brake system should fail, the brake
system will still operate conventionally. But when the ªABSº
warning light is on (and the brake system warning light is off),
anti±lock system is not assisting brake performance so that
the wheels could lick up during a sudden brake or braking on
slippery road surfaces. Have your vehicle checked by your
Lexus dealer as soon as possible.
Drum±in±disc type parking brake system
Your vehicle has a drum±in±disc type parking brake system.
This type of brake system needs bedding±down of the brake
shoes periodically or whenever the parking brake shoes
and/or drums are replaced.
Have your Lexus dealer perform the bedding±down.
BRAKE PAD WEAR LIMIT
INDICATORS
The brake pad wear limit indicators on your disc brakes
give a warning noise when the brake pads are worn to
the extent that replacement is required.
If you hear a squealing or scraping noise while driving, have
the brake pads checked and replaced by your Lexus dealer
as soon as possible. Expensive rotor damage can result if
the pads are not replaced when needed.