Page 13 of 18
ELECTRICAL COMPONENTS
229
CHECKING THE CARTRIDGE TYPE
FUSES
Engine compartment
Driver's side instrument panel
If the headlights or other electrical components do not
work and the blade type fuses are O.K., check the
cartridge type fuses. If any of the cartridge type fuses
are blown, they must be replaced.
Page 15 of 18
ELECTRICAL COMPONENTS
231
CHECKING THE HEADLIGHT AIM
Beam angle gauge (horizontal movement)
Beam angle gauge (vertical movement)
Before checking the headlight aim:
1. Be sure that the body around the headlights is not
deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver's seat so that the vehicle
has its normal load (with the tank full).
4. Bounce the vehicle several times.
Bubble Acceptable range
Vertical movement gauge: The bubble of the gauge should
not deviate from the center of the gauge by more than two
marks to either side of the gauge.
Page 17 of 18
11
ELECTRICAL COMPONENTS
233 LIGHT LOCATION
Light Bulbs Bulb No. W Type
Headlights (high
beam)9005 65 A
Headlights (low
and high beam)H7 55 B
Front turn signal
and parking lights1157NA 27/8 D
Fog lights H3 55 C
Light Bulbs Bulb No. W Type
High mounted
stoplightÐ21E
Rear side marker
lightsW5W 5 E
Tail and stop lights Ð 21/5 E
Tail lights W5W 5 E
License plate lights W5W 5 E
Back±up lights Ð 21 E
Rear turn signal
lightsÐ21E
