CHASSIS
208
CHECKING BRAKE FLUID
To check the fluid level, simply look at the see±through
reservoir. The level should be between the ªMAXº and
ªMINº lines on the tank.
It is normal for the brake fluid level to go down slightly as the
brake pads wear. So be sure to keep the reservoir filled.
If the reservoir needs frequent refilling, it may indicate a
serious mechanical problem.
If the level is low, add FMVSS No. 116 DOT 3 or SAE
J1703 brake fluid to the brake reservoir.
Remove and replace the reservoir cover by hand. Add brake
fluid up to the ªMAXº line.
Use only newly opened brake fluid. Once opened, brake fluid
absorbs moisture from the air, and excess moisture can
cause a dangerous loss of braking efficiency.
CAUTION!
Take care when filling the reservoir because brake
fluid can harm your eyes and damage painted
surfaces. If fluid gets in your eyes, flush your eyes
with clean water.
NOTICE
If you spill some of the fluid, be sure to wash it off
with water to prevent it from damaging the parts or
paintwork.
