21
Program Diesel Cutoff Solenoid
NOTE:
Perform this function only when the Immobilizer C/U is replaced.
1. Select "Body" and "Immobilizer".
2. Select engine type.
3. See Immobilizer status on the display of Tech 2.
4. Enter the security code.
5. See ECM or PCM status.
6. Select "F3: Program Diesel Cutoff Solenoid".
Programming
F0: Program Immobilizer Function
F1: Program Transponder-Keys
F2: Program Mechanical Key Number
F3: Program Diesel Cutoff Solenoid
7. Confirm the following screen shows up.
Program Diesel Cutoff Solenoid
See Checking Procedure Before
Programming!
(1) 2001 (TF) LUV
Electronic System: Immobilizer
Confirm
8. Confirm the following screen shows up.
Program Diesel Cutoff Solenoid
If Battery Voltage Is Low Disconnect
Fuse For Glow Plugs!
(1) 2001 (TF) LUV
Electronic System: Immobilizer
Confirm
22
9. Turn the ignition switch OFF/ON following the screen.
10. The following screen shows up.
Program Diesel Cutoff Solenoid
(1) 2001 (TF) LUV
Electronic System: Immobilizer
0100%
11. Follow the screen procedure.
12. Confirm that there is frequent rattling every 10 seconds.
Program Diesel Cutoff Solenoid
Frequent Rattling Every 10 Seconds?
(1) 2001 (TF) LUV
Electronic System: Immobilizer
NOYES
13. Confirm the following screen shows up.
Program Diesel Cutoff Solenoid
Reconnect Fuse Glow Plugs!
(1) 2001 (TF) LUV
Electronic System: Immobilizer
Confirm
