Page 20 of 321
17 %
*
[IS11000(M GV)03/96]
Check Engine Warning Light
%*
[IS11100(M BCGV)04/96]
This light illuminates when the engine's
Emission Control System requires service. It will
also illuminate when the ignition key is in the
ON position and the engine is off.
[IS11300(M GV)04/96]
one inch art:0010134-A
The check engine warning light
[IS12105(M )04/96]
Anti-Theft Alarm Light
[IS12150(MBC )04/96]
one inch art:0001389-A
Anti-theft alarm light
[IS12200(MBC )04/96]
This light is used when you set the anti-theft
alarm system. SeeAnti-Theft Systemin the
Controls and Featureschapter for more
information.
%*
[IS12300( ALL)03/96]
Turn Signal Indicator Lights
*
[IS12400( ALL)03/96]
The turn signal arrow will flash to indicate the
direction in which you are going to be turning.
[IS12500( ALL)04/96]
one inch art:0010525-A
The turn signal indicator light
File:03rcism.ex
Update:Thu May 30 15:36:44 1996
Page 98 of 321

96purchased either through your dealership or
selected retailers. Be sure to purchase only coded
keys with a Ford or Mercury logo on it to
ensure proper functionality. If both supplied
keys are lost or stolen, the vehicle must be
brought to the dealership for re-initialization.
[CF57900(M )05/96]
quarter page art:0011372-A*
[CF58000(M )05/96]
Theft Indicator
*
[CF58100(M )05/96]
The indicator provides system proveout and
operating status. The system activates the
indicator when the ignition switch is placed in
the ON or START position. This indicator helps
to determine possible fault conditions and/or
normal operating proveout. The system will
illuminate the indicator for two (2) seconds then
go out to acknowledge normal operating
conditions. If the indicator does not illuminate at
key ON or flashes, have the system serviced.
*
[CF58200(M )05/96]
Spare Key Programming Procedure
*
[CF58300(M )05/96]
Two electronically coded keys were supplied
with your vehicle, use one of these with the
procedure below:
*
[CF58400(M )05/96]
q
Using a coded key that you can start your
engine with, turn the ignition from the ON to
the OFF position.
*
[CF58500(M )05/96]
q
Within 15 seconds, insert a new key into the
ignition and turn it to ON or START. The
vehicle does not have to be started.
File:05rccfm.ex
Update:Thu Apr 3 07:41:31 1997
Page 164 of 321
![FORD MUSTANG 1997 4.G Owners Manual 165 %
*
[GF09200( ALL)03/96]
Driving
[GF09500(M )04/96]
Your vehicles gearshift is console-mounted on
the floor. The Transmission Control Switch (TCS)
is located on the gearshift handle. The
Transmis FORD MUSTANG 1997 4.G Owners Manual 165 %
*
[GF09200( ALL)03/96]
Driving
[GF09500(M )04/96]
Your vehicles gearshift is console-mounted on
the floor. The Transmission Control Switch (TCS)
is located on the gearshift handle. The
Transmis](/manual-img/11/5204/w960_5204-163.png)
165 %
*
[GF09200( ALL)03/96]
Driving
[GF09500(M )04/96]
Your vehicle's gearshift is console-mounted on
the floor. The Transmission Control Switch (TCS)
is located on the gearshift handle. The
Transmission Control Indicator Light (O/D OFF)
is located on the instrument panel. You can put
the gearshift lever in any of the several
positions.
[GF09700(MBC )12/95]
The OVERDRIVE OFF light is off (not
illuminated) during normal vehicle operation.
This allows the transmission to upshift and
downshift from 1st through 4th gears. When the
TCS is pressed, the Transmission Control
Indicator Light will illuminate (O/D OFF) on the
instrument panel. When this O/D OFF is
illuminated the transmission will upshift and
downshift from 1st through 3rd gears.
[GF09800( ALL)12/95]
If the O/D OFF light does not come ªonº when
the TCS is depressed or if the light ªFLASHESº
when you are driving, have your vehicle
serviced at the first opportunity. If this condition
persists, damage could occur to the transmission.
[GF10000(M )04/96]
To return the transmission to normal operation
(1st through 4th gear) depress the TCS marked
ªO/Dº again. This switch may be used to cancel
overdrive any time the vehicle is being driven.
Each time your vehicle is started, the overdrive
system will automatically be in the normal
overdrive mode and the O/D light will not be
illuminated.
%*
[GF10200(MBC )01/96]
When to use D (Overdrive)
*
[GF10300( ALL)12/95]
Overdrive is the usual driving position for an
automatic overdrive transmission. It works the
same way Drive works, automatically upshifting
or downshifting as the vehicle speeds or slows.
File:09rcgfm.ex
Update:Mon Feb 24 10:18:27 1997
Page 298 of 321

Index 309
Index
A
ABS warning light
(see Anti-lock brake system)....... 12
Accessories............... 287
Accessory position on the ignition..... 65
Accessory power source, power
point outlet.............. 63
Additives, engine oil.......... 216
Air bag supplemental
restraint system..........124, 129
and child safety seats.......129±130
description............124±125
driver air bag..........124±125
indicator light............. 14
operation.............. 125
passenger air bag........... 125
service and information labels..... 125
tone generator............ 127
Air cleaner filter
location............... 213
specifications............. 265
Air conditioning, manual heating and air
conditioning system........... 55
Alarm, activating remote personal..... 98
Antenna, radio
(see Electronic sound system)...... 25
Antifreeze (see Engine coolant)...... 224
Anti-lock brake system (ABS)
description.............. 157
see also Brake............ 157
warning light.............. 12
warninig light............. 11
Anti-theft lug nuts and key....... 199
File:rcixm.ex
Update:Thu Apr 3 07:52:02 1997
Page 311 of 321

322 Index
Lights, warning and indicator (continued)
engine oil pressure........... 22
hazard warning light.......... 71
high beam............... 16
low coolant............... 14
oil pressure............... 22
overdrive off.............. 15
safety belt............... 13
service engine soon........... 17
turn signal indicator....... 17,67±68
Load limits............... 170
GAWR................ 170
GVWR................ 170
trailer towing............. 173
Lubricant specifications......... 267
Lug nuts................ 194
anti-theft............... 199
standard............... 195
tightening sequence........194, 198
M
Maintenance schedule and record
(see separate Maintenance Schedule and
Record booklet)............. 4
Maintenance (see Servicing)....... 209
Maintenance (see servicing)........ 209
Manual transaxle
backing up (reverse).......... 168
clutch................ 167
shifting gears............. 168
shift speeds.............. 169
Manual transmission
backing up (reverse).......... 168
clutch..............167, 222
driving................ 167
fluid, checking and adding....... 237
fluid capacities............ 266
lubricant specifications......... 267
shifting gears............. 168
shift speeds.............. 169
File:rcixm.ex
Update:Thu Apr 3 07:52:02 1997