1997 DODGE NEON Turn signal

Downloaded from www.Manualslib.com manuals search engine 8W-51 REAR LIGHTING
INDEX
page page
DESCRIPTION AND OPERATION
BACK-UP LAMPS....................... 10
FOG LAMPS (REAR)...................... 9STOP LAMPS.......................... 10
TAIL LAMPS AND LICENSE LAMPS.......... 9
DESCRIPTION AND OPERATION
TAIL LAMPS AND LICENSE LAMPS
Circuit A3 in the Power Distribution Center (PDC)
connects to a bus bar in the fuse block. One of the
four circuits powered by the bus bar is circuit F33. A
40 amp fuse in the PDC protects the A3 circuit. A 15
amp fuse, in cavity number 2 of the fuse block, pro-
tects the F33 circuit.
The headlamp switch has 3 positions, ON, PARK
(tail lamps) and OFF, plus a dimmer switch. When
the headlamp switch is in the PARK or ON position,
it connects circuit F33 to circuit L7. From the head-
lamp switch, circuit L7 branches to power the front
parking lamps, rear tail lamps, side marker lamps,
and rear license plate lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the tail lamps, park-
ing lamps, headlamps, side marker lamps, lamps and
rear license plate lamps although different grounding
points are used. Circuit Z1 also provides the ground
path for the headlamps, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for a blown 40 amp fuse in the PDC.
²Check for a blown fuse in cavity 2 of the fuse
block
²For the left rear parking lamp, turn signal, side
marker lamp, and the rear license plate the Z1 cir-
cuit grounding point is in the left rear wheel well.
²For the right rear parking lamp, turn signal and
side marker lamp, the Z1 circuit grounding point is
in the right rear wheel well.
²Circuit L7 also feeds the radio, if equipped.
²When the headlamp switch is in the PARK or
ON position, the dimmer circuit, F33, connects to cir-
cuit E1. Circuit E1 powers the ash receiver lamp,
transmission range indicator lamp, instrument panel
cluster illumination lamps, HVAC control lamp,
heated rear window lamp, and radio lamp. A 4 amp
fuse, in cavity 12 of the fuse block, protects circuit
E1.
FOG LAMPS (REAR)
The rear fog lamps will operate only when the
headlamp switch is in the ON position.
Circuit A3 from the Power Distribution Center sup-
plies (PDC) voltage to a bus bar in the fuse block.
Circuit F61 is one of four circuits that the bus bar
feeds and is protected by a 20 amp fuse in cavity 4.
Circuit F61 connects to the rear fog lamp switch and
the front fog lamp relay.
The fog lamp switch contains a relay that supplies
voltage to the fog lamps. Circuit L2 from the multi-
function switch supplies voltage to the coil side of the
relay (only when the headlamps operate on LOW
beam). Circuit F61 supplies voltage to the contact
side of the relay. During LOW beam headlamp oper-
ation when the fog lamp switch contacts CLOSE, cir-
cuit F61 connects to circuit L38.
Circuit L38 feeds right and left fog lamp. Circuit
L38 also feeds the green L.E.D. in the switch that
illuminates during fog lamps operation.
When the headlamp switch is in the PARK or ON
position, circuit E1 from the headlamp switch sup-
plies voltage for circuit E2. Circuit E2 contains a 4
amp fuse in cavity 12 of the fuse block, and powers
the bulb in the fog lamp switch.
GROUND CIRCUIT
Although circuit Z1 provides the ground path for
the fog lamps, the circuit has different grounding
points for each lamp.
Circuit Z3 supplies the ground path for the fog
lamp switch. The grounding point for the headlamp
switch is the instrument panel left center support.
HELPFUL INFORMATION
²Circuit Z1 also supplies ground for side marker
lamps, turn signals, parking lamps and headlamps.
²Circuit A3 from the PDC supplies voltage to the
headlamp switch for circuit L2.
²Circuit F33 from the fuse block supplies voltage
to the headlamp switch for circuit E1. Circuit A3
from the PDC supplies voltage to a bus bar in the
fuse block that feeds the F33 circuit. Fuse 2, in the
fuse block, protects the F33 circuit.
PL8W - 51 REAR LIGHTING 8W - 51 - 9

Downloaded from www.Manualslib.com manuals search engine STOP LAMPS
Circuit F32 in the Power Distribution Center
(PDC) feeds the stop lamps. Circuit F32 connects to
the stop lamp switch. A 15 amp fuse in the PDC pro-
tects circuit F32.
When the operator presses the brake pedal, the
stop lamp switch CLOSES and connects circuit F32
to circuit L50. Circuit L50 connects to the stop
lamps. Circuit L50 also splices to power the CHMSL
lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the stop lamps,
CHMSL lamp, and the stop lamp switch. The Z1 cir-
cuit has more than one grounding point. It also sup-
plies ground path for the tail lamps, parking lamps,
headlamps, side marker lamps, rear license plate
lamp, back-up lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuit F32 (in PDC).
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²For the stop lamp switch, the Z1 circuit ground-
ing point is in the left front inner fender shield.
BACK-UP LAMPS
In the RUN position, the ignition switch connects
circuit A2 from the Power Distribution Center (PDC)to circuit A22. Circuit A22 feeds a bus bar in the fuse
block. A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
Circuit F20 is one of four circuits that connects to
the fuse block bus bar fed by circuit A22. Circuit F20
supplies power to the back-up lamp switch. On 3±spd
automatic transaxle vehicles, the back-up lamp
switch is part of an assembly that includes the park/
neutral position switch.
When the operator puts the transmission in
REVERSE, the back-up lamp switch connects circuit
F20 to circuit L1. Circuit L1 feeds the back-up lamps.
A 10 amp fuse, in cavity 8 of the fuse block, protects
F20 and L1 circuits.
GROUND CIRCUIT
Circuit Z1 provides ground for the back-up lamps.
The Z1 circuit has more than one grounding point. It
also supplies ground path for the tail lamps, parking
lamps, headlamps, side marker lamps, rear license
plate lamp, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuits A2 and F20.
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²Circuit F20 feeds the heated rear window switch
and A/C clutch cycling switch.
8W - 51 - 10 8W - 51 REAR LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 8W-52 TURN SIGNALS
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 5
Component Page
Combination Flasher..................8W-52-2
Fuse 6 (FB).........................8W-52-2
Fuse 20 (PDC).......................8W-52-2
Fuse Block.........................8W-52-2
G101..............................8W-52-3
G103..............................8W-52-3
G201..............................8W-52-2
G301..............................8W-52-4
G302..............................8W-52-4
Left Park/Turn Signal Lamp............8W-52-3
Left Repeater Lamp..................8W-52-3
Left Turn Signal Lamp................8W-52-4
Power Distribution Center.............8W-52-2
Right Park/Turn Signal Lamp...........8W-52-3
Right Repeater Lamp.................8W-52-3Component Page
Right Turn Signal Lamp...............8W-52-4
S107..............................8W-52-3
S112 ..............................8W-52-3
S113 ..............................8W-52-3
S116 ..............................8W-52-3
S117 ..............................8W-52-3
S127..............................8W-52-3
S205..............................8W-52-2
S207..............................8W-52-3
S212..............................8W-52-3
S307..............................8W-52-4
S308..............................8W-52-4
S315..............................8W-52-4
Turn Signal/Hazard Switch.........8W-52-2, 3, 4
8W - 52 - 2 8W - 52 TURN SIGNALSPL

Downloaded from www.Manualslib.com manuals search engine RUN A22
11
65
2 12 1
2 RIGHT 1 LEFT
SWITCH
HAZARD
SIGNAL/
TURN
6FUSE10A
26
BLOCK
FUSE
20FUSE
10A
POWER
DISTRIBUTION
CENTER BATT A0
L9
18
BK/WT
14C103
L5
20
BK
4
A3 A1
A2 L55
20
BK/YL
L32
20
PK
INPUT OUTPUT
GROUND
(IN FB) FLASHER
COMBINATION
G201
S205
Z2
20
BK/LG
Z2
20
BK/LG
L9
22
BK/WT
20
195
31019
(8W-11-8)(8W-11-2)
(8W-10-9)(8W-10-4)
(8W-15-5) (8W-15-5) (8W-10-4) (8W-10-6)
8W - 52 - 2 8W-52 TURN SIGNALSPL-RHD
978W-1PLR05201

Downloaded from www.Manualslib.com manuals search engine 10 1
L61
22
LG
L61
22
LG
L61
22
LG
L60
22
TN
L60
22
TN
L60
22
TN
S116 S112
9C103C1013
2121
L61
18
LGL61
18
LGL60
18
TNL60
18
TN
L7
18
BK/YLL7
18
BK/YL
Z1
18
BKZ1
18
BKZ1
18
BKZ1
18
BK
S117 S107
G101 G103
Z1
18
BK
Z1
18
BK
Z1
18
BK
S127 LEFT
REPEATER
LAMP
LAMP SIGNAL
TURN
PARK/
LEFT RIGHT
PARK/
TURN
SIGNAL
LAMPLAMP REPEATER
RIGHT
1
2 31
2 3
2 RIGHT 1 LEFT
SWITCH
HAZARD
SIGNAL/
TURN
S113 S212 S207
(8W-15-4) (8W-15-2)
(8W-15-2) (8W-15-4)(8W-50-5) (8W-40-4) (8W-50-3)
PL-RHD8W-52 TURN SIGNALS 8W - 52 - 3
PLR05202978W-1

Downloaded from www.Manualslib.com manuals search engine 2 1
92 13
2 RIGHT 1 LEFT
SWITCH
HAZARD
SIGNAL/
TURN
L63
20
DG/RD
4
L63
18
DG/RD
Z1
18
BK
S308
Z1
18
BK
L62
20
BR/RD
C230
L62
20
BR/RD
BK16Z1
S307
BK18Z1
G302 G301
21 1
2
L63
18
DG/RDL62
18
BR/RD
6C3406C341
Z1
18
BK
S315
3C340
Z1
18
BK
LAMP SIGNAL
TURN
LEFT RIGHT
TURN
SIGNAL
LAMP C230
3
3C341
Z1
18
BK
101114
(8W-15-8)(8W-15-9)
(8W-15-8) (8W-15-9) (8W-15-8)
8W - 52 - 4 8W-52 TURN SIGNALSPL-RHD
978W-1PLR05203

Downloaded from www.Manualslib.com manuals search engine 8W-52 TURN SIGNALS
INDEX
page page
DESCRIPTION AND OPERATION
HAZARD FLASHERS..................... 5TURN SIGNALS......................... 5
DESCRIPTION AND OPERATION
TURN SIGNALS
Voltage for the turn signals flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A2. With the key in the RUN position, the
ignition switch connects voltage from the A2 circuit
to the A22 circuit. A 40 amp fuse in the PDC protects
the A2 and A22 circuits.
Circuit A22 connects to a bus bar in the fuse block.
L5 is one of the circuits fed by the bus bar. Circuit
L5 contains a 10 amp fuse and supplies voltage to
the multi-function switch. The multi- function switch
supplies voltage to the combination flashing unit on
circuit L55. Voltage leaves the combination flashing
unit on circuit L32 and flows to the multi-function
switch connector.
RIGHT TURN SIGNAL
When the operator selects the right turn signal,
the multi-function connects power from circuit L32 to
circuits L60 and L62. Circuit L62 connects to the
multi-function switch and feeds the right rear turn
signal/hazard flasher/stop lamp.
Circuit L60 connects to the multi-function switch
and feeds the right front turn signal/hazard flasher
lamp and side marker lamp. Circuit L60 also splices
to power the turn signal indicator lamp on the
instrument cluster.
LEFT TURN SIGNAL
When the operator selects the left turn signal, the
multi-function connects power from circuit L32 to cir-
cuits L61 and L63. Circuit L63 connects to the multi-
function switch and feeds the left rear turn signal/
hazard flasher/stop lamp.
Circuit L61 connects to the multi-function switch
and feeds the left right front turn signal/hazard
flasher lamp and side marker lamp. Circuit L61 also
splices to power the turn signal indicator lamp on the
instrument cluster.
GROUND CIRCUIT
Circuit Z1 provides ground for all the turn signal
lamps, although the it has different grounding pointsfor each turn signal circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is the left side of
the radiator closure panel.
²For the right front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp, the Z1 circuit grounding point is in the left
rear wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp, the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
²A 10 amp fuse, in cavity 6 of the fuse block, pro-
tects circuit L5.
²A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
²The bus bar in the fuse block that connects to
circuit A22 and feeds circuit L5 for the turn signals
also powers three other fuse protected circuits. The
other circuits are C1, F20 and F25.
HAZARD FLASHERS
Circuit L9 from the Power Distribution Center
(PDC) supplies battery voltage for the hazard flash-
ers. A 10 amp fuse in the PDC protects circuit L9.
Circuit L9 connects to the multi-function switch.
With the hazard flashers ON, the multi-function
switch connects circuits L9 and L55.
Circuit L55 feeds the combination flashing unit.
Circuit Z2 provides ground for the flashing unit.
From the flashing unit, circuit L32 connects to the
multi-function switch. With the hazard flashers ON,
the multi-function switch connects circuit L32 to cir-
cuits L60, L61, L62, and L63.
PL8W - 52 TURN SIGNALS 8W - 52 - 5

Downloaded from www.Manualslib.com manuals search engine Circuit L60 supplies voltage to the right front turn
signal/hazard lamp. The L60 circuit splices to the
instrument cluster to power the right indicator lamp.
Circuit L61 supplies voltage to the left front turn
signal/hazard lamp. The L61 circuit splices to the
instrument cluster to power the left indicator lamp.
Circuit L62 supplies voltage to the right rear turn
signal/hazard flasher/stop lamp.
Circuit L63 supplies voltage to the left rear turn
signal/hazard/flasher/stop lamp.
GROUND CIRCUITS
Circuit Z3 provides ground for the instrument clus-
ter indicator lamps. The termination point for circuit
Z3 is the instrument panel left center support.
Circuit Z1 provides ground for all the turn signal/
hazard lamps, although the it has different ground-
ing points for each circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp the Z1 circuit grounding point is the left side of
the radiator closure panel.²For the right front turn signal/hazard flasher
lamp the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp the Z1 circuit grounding point is in the left rear
wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
8W - 52 - 6 8W - 52 TURN SIGNALSPL
DESCRIPTION AND OPERATION (Continued)