Downloaded from www.Manualslib.com manuals search engine 3. Remove the lamp assembly from the vehicle by
pulling forward. Use care not to scratch the vehicle
with the lamp or the lamp with the fender.
harness and twist the bulb less than one-quarter
of a
turn to the left and remove. Gently wiggle the bulb
from the socket.
4. For the high or low-beam bulbs, unclip the wiring
5. For the turn signal bulb, press the tab on the white
bulb socket and twist it less than one-quarter
of a
turn to the left.
6. Reconnect the wiring harness to the bulb or
lamp assembly.
lining up the lamp to the mounting balls.
7. Replace the lamp to its original position by carefully
8. Press down on the two latches. Replace the splash
shield by pushing down on the retainer.
6-31
Downloaded from www.Manualslib.com manuals search engine Replacement Bulbs
Outside Lamps Bulb
High-Beam Headlamp .................... 9005
Low-Beam Headlamp
.................... 9006
Front Park/Turn
...................... 3 157 NA
Back-UpRear Turn ...................... 3 156
High Level Stop
.......................... 921
TaiVStoplamp
........................... 3057
Inside Lamps Bulb
Dome .................................. 561
Capacities and Specifications
Engine Crankcase
2.4L Engine .................... 4 quarts (3.8 L)
3 100 Engine .................. 4.5 quarts (4.3 L)
Cooling System
2.4L Engine ................. 11.3 quarts (10.7 L)
3100 Engine
................ 13.6 quarts (12.9 L)
Refrigerant, Air Conditioning ..... See refrigerant
charge label under the hood.
Fuel Tank ................. 15.2 gallons (57.5 L)
Tire Pressures, Sizes ........... See Tire-Loading
Information label
on the rear
driver’s side passenger door.
Wheel Nut Torque .......... 100 lb-ft (140 N-m)
NOTE: All capacities are approximate. When adding, be
sure to
fill to the appropriate level or as recommended in
this manual.
See “Recommended Fluids and Lubricants” in
the Index.
6-61
