1997 CHEVROLET CAVALIER lock

[x] Cancel search: lock

Page 100 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Parking  Lamps 
PC This position  will  turn  on the  following: 
0 Parking  Lamps 
0 Sidemarker  Lamps 
0 Taillamps 
0 Instrument  Panel  Ligh

Page 102 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Interior  Lamps 
Instrument  Panel  Intensity  Control 
You can  brighten  or  dim  the  instrument  panel  lights  by 
turning  the  dial up

Page 104 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine To reactivate  the  interior  lamps,  either: 
The ignition  must  be  turned  on, 
The  activated  lamp  switch  must  be  turned  off,  then

Page 105 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Manual  Remote  Control  Mirror 
The outside  rearview  mirror 
should  be  adjusted 
so you 
can  just  see the  side  of 
your  vehicle  when

Page 108 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Ashtrays and Cigarette Lighter 
To use  the  lighter, just push  it in all the way  and  let go. 
When  it’s  ready,  it will  pop back  out

Page 111 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine 6. Rotate  the  latch  handle  up  to  the  locked position. 
Installing the Boot 
I 1 
1. From inside  the vehicle,  pull  the tab on  the  re

Page 116 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Raising  the  Convertible Top 
1. Set  the  parking  brake  and  shift  your  automatic 
transaxle  to 
PARK (P) or  your  manual  transaxle  t

Page 119 of 388

CHEVROLET CAVALIER 1997 3.G Owners Manual Downloaded from www.Manualslib.com manuals search engine 8. Raise the top until it is all  the  way  up.  Line up the 
top 
so the  pins  are even  with  the  holes. 
9. Pull  down  on  the  top and