1997 BUICK REGAL ECU

Securing a Child Restraint in a Rear
Outside Seat Position
n
U
You’ll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
2. Secure the child in the child restraint as the
instructions say.
3. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
If the shoulder belt goes in front of the child’s face or
neck, put
it behind the child restraint.
4. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly if you ever had to.
1-51
ProCarManuals.com

5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock. 6. To tighten the belt, feed the shoulder belt back into
the retractor while you push down on the child
restraint.
7. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle's
safety belt
and let it go back all the way. The safety belt
will
move freely again and be ready to work for an adult
or larger child passenger.
1-52
ProCarManuals.com

Securing a Child Restraint in the Center Rear Seat Position
U
You'll be using the lap belt.
See the earlier part about the top strap if the child
restraint has one.
1.
2.
3.
4.
Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
Put the restraint
on the seat. Follow the instructions
for the child restraint.
Secure the child in the child restraint as the
instructions say.
Run the vehicle's safety belt through
or around the
restraint. The child restraint instructions will show
you how.
1-53
ProCarManuals.com

5. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly if you ever had to.
6. To tighten the belt, pull its free end while you push
down on the child restraint.
7. Push and pull the child restraint in different
directions to be sure
it is secure. If it isn’t, secure the
restraint in
a different place in the vehicle and
contact
the child restraint maker for their advice
about how to attach
the child restraint properly.
To remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work for an adult or larger
child passenger.
Securing a Child Restraint in the Right
Front Seat Position
U
Your vehicle has a right front passenger air bag. Never
put a rear-facing child restraint in this seat. Here’s why:
I
~ A child in a rear-facing child restraint can be
~ seriously injured if the right front passenger’s air
bag inflates. This
is because the back of a
rear-facing child restraint would be very close to
the inflating air bag. Always secure a-rear-facing child restraint in the rear seat.
1-54
ProCarManuals.com

You’ll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has
one.
1.
2.
3.
4.
Because your vehicle has a right front passenger air
bag, always move the seat as far back
as it will go
before securing a forward-facing child restraint. (See
“Seats” in the Index.)
Put the restraint on the seat. Follow the instructions
for the child restraint.
Secure the child in the child restraint as the
instructions say.
Pick
up the latch plate, and run the lap and shoulder
portions
of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
If the shoulder belt goes in front of the child’s face
or neck, put it behind the child restraint. 5. Buckle the belt. Make sure the release button is
positioned so you would be able to unbuckle the
safety belt quickly if
you ever had to.
ProCarManuals.com

6. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock. 7. To tighten the belt, feed the shoulder belt back into
the retractor while you
push down on the child
restraint.
8. Push and pull the child restraint in different
directions to be sure
it is secure.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it
go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
1-56
ProCarManuals.com

Rear Door Security Locks Your Buick is equipped with rear door security locks
that help prevent passengers from opening the rear
doors
of your vehicle from the inside. To use one of
these locks:
1. Open one of the rear doors.
2. On the inside of the rear door will be a lock. Insert
your key into this lock and rotate
it upward. This
will engage
the safety lock.
3. Close the door.
4. Do the same thing to the other rear door lock.
The rear doors of your vehicle cannot be opened from
the inside when
this feature is in use. If you want to
open the rear door when
the security lock is on, unlock
the door from the inside and then open the door from
the outside.
ProCarManuals.com

Automatic Power Door Locks
Programmable Automatic Power Door Locks is a
standard feature that is intended to provide enhanced
security and convenience by automatically locking and
unlocking doors. This feature provides four operating
modes. For your vehicle,
you may select and program
one of the following four operating modes:
Mode 1: No automatic door lock or unlock.
Mode 2: Automatic all-door lock when the transmission
is shifted out of PARK
(P).
No automatic door unlock.
Automatic door relock when any door
is unlocked,
opened and then all doors are again closed while the
vehicle is not in PARK (P) or NEUTRAL
(N) and the
driver’s foot is on the brake pedal.
Mode 3: Automatic all-door lock when the transmission
is shifted out
of PARK (P).
Automatic all-door unlock when the transmission is
shifted into PARK (P).
Automatic door relock when any door is unlocked,
opened and then all doors are again closed while the
vehicle
is not in PARK (P) or NEUTRAL (N) and the
driver’s foot
is on the brake pedal.
Mode 4: Automatic all-door lock when the transmission
is shifted out of PARK
(P).
Automatic driver’s door only unlock when the
transmission is shifted into PARK
(P).
Automatic door relock when any door is unlocked,
opened and then all doors
are again closed while the
vehicle is not in PARK
(P) or NEUTRAL (N) and the
driver’s foot is on the brake pedal.
The operating mode of the Programmable Automatic
Power Door Locks will be changed when the driver
performs the following sequence with the doors closed
and the ignition key
in the RUN position:
Press and hold the power door lock switch. While
holding the door lock switch, cycle the transmission out
of and back into PARK (P). After an initial transmission
cycle, each additional cycle will advance the operating
mode by one, starting from the current operating mode.
During this procedure,
the Automatic Door Lock and
Unlock functions will operate as defined by each mode
above, providing the driver with feedback of the current
operating mode. If cycled beyond Mode
4, the vehicle
will enter operating Mode
1. When the door lock switch
is released, the vehicle will remain in the most recent
operating mode.
ProCarManuals.com