13-19
Installing
Installation is the reverse of removal, noting the
following:
- Install V-belt and loosely bolt both halves of belt
pulley to coolant pump.
- Slowly bring belt pulley halves together by
turning coolant pump and tightening bolts for
belt pulley in stages.
While tightening pulley halves, the V-belt must
move outward and sit correctly on belt pulley.
- Tighten bolts to 25 Nm (18 ft lb).
Note:
Adjustment of V-belt tension for coolant pump is
not possible.
- Install ribbed belt and release tension on
tensioner.
- Start engine and check running of belt.
- Check tightening torque of bolts for coolant
pump belt pulley.
Pa
ge 21 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1
