37-118
- Bolt drive axles to transmission flanges.
Repair Manual, Suspension, Wheels,
Steering, Repair Group 40
- Bolt driveshaft to transmission flange page
39
-79
, Driveshaft, removing and installing.
- After connecting battery, enter anti-theft code for
radio.
Radio operating manual
- Check adjustment of selector lever cable
page 37
-45
.
- Check gear oil in final drive with transmission
installed page 39
-1 .
- Then check ATF level and top off Page 37
-
133
onward.
- Fully close power windows to stop.
Pa
ge 48 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
37-132
For transmissions with Front Wheel Drive (FWD), the VW540 holding
fixture can also be used to secure the transmission to the VW313 holding
fixture. - Attach the 3457 attachment and holding rig at the transmission housing
mounts and secure.
- Bolt the attachment and holding rig to the VW 309 holding plate and
place this into the VW313 holding fixture using a workshop crane.
WARNING!
The center of gravity of the transmission is located outside the
turning center at holding fixture. To turn the transmission, a second
technician must hold the transmission housing to prevent back-
swing.
Note:
Vents for the transmission housing and final drive must be closed before
turning a filled transmission on the assembly stand so that the oil pan
faces upward . - Secure transmission to VW540 holding fixture (arrows) and insert in
VW313 holding fixture.
Pa
ge 64 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
