Page 4 of 18
42-26
 
  
Suspension strut, servicing
 
Component locations  
CAUTION! 
Part numbers are listed here for reference only. 
Always check with your Parts department for 
the latest information.  1 - 
Cap 
2 - 
O-ring 
Coat with silicone grease, Part No. G 000 
405 A2 
3 - 
Self-locking nut Always replace25 Nm (18 ft lb)
4 - 
Dished washer 
5 - 
Mounting ring Make sure installation position is correct 
when installing 
6 - 
Gasket (foam) Always replace
7 - 
Upper spring retainer 
Pa
ge 4 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2 
         
        
        
     
        
        Page 11 of 18
42-31
 
    
Assembling 
Note:  
The left and right-side suspension struts are identical parts.  -  Compress coil spring using VAG1752/1 spring compressor until upper 
spring retainer is free. 
-  Remove self-locking nut from piston rod (counter hold using hex 
wrench). 
-  Remove appropriate components.
    
Clamp shock absorber in VAG1752/2 spring mounting tool.  
  
Pa
ge 11 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2 
         
        
        
     
        
        Page 13 of 18
42-33
      
-  Install upper spring retainer.
    
Stamped nuts of spring retainer (arrows) must be located in recesses 
of spring base. 
-  Install mounting ring, dished washer and self-lock-nut.
-  Mount VAG1752/8 adjustment gauge for struts onto VAG1752/2 spring 
mounting tool. 
    
-  Mount VAG1752/8 gauge onto upper spring retainer and tighten bolts.
-  Lock VAG1752/2 spring mounting tool upper levers into position.
Pa
ge 13 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2 
         
        
        
     
        
        Page 14 of 18
42-34
 
    
-  Loosen lower locking lever and turn upper spring retainer until scale of 
VAG1752/2 spring mounting tool is positioned at 0 . -  Make sure that ends of springs lie against stops.
-  Secure locking lever in position.
    
-  Tighten self-locking nut using 3379 socket wrench insert and 3079 
counter holder. 
   Tightening torque: 25 Nm (18 ft lb)
Pa
ge 14 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2