42-9
- Unbolt heat shield cover (arrows indicate bolted connections) and push
forward until parking brake cable adjuster becomes accessible.
- Loosen both cable adjusters as follows:
- Remove locking clip -D-.
- Screw in adjusting nut -C- up to stop.
- Push adjuster together.
Pa
ge 11 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1
42-12
Installing
- Install axle together with guide bushings into
mounting brackets and install bolts hand-tight.
- Install suspension struts and hand-tighten
suspension strut to axle beam bolts.
- Coat O-ring for ABS wheel speed sensor with
brake cylinder paste.
Repair Manual, Brake System, Repair Group 46
Repair Manual, Brake System, Repair Group 47 - Push ABS wheel speed sensors into wheel bearing housings up to
stop.
- Install locking plates for ABS wheel speed sensors.
- Route parking brake cables and attach to brake calipers.
- Connect brake lines.
- Adjust parking brake:
- Install heat shield.
- Bleed brakes:
Pa
ge 14 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1
