Page 22 of 32
42-57
      
Rear axle, removing and installing (all-
wheel-drive vehicles)
 
     
Special tools, test equipment and auxiliary 
items  
     
VAG1752/1 spring compressor
     VAG1752/3 adaptor with protective linings
     VAG1383A engine/transmission lifter
     VAG1359/2 universal mount
     
Removing  
     
-  Remove rear center console:
     
       Repair Manual, Body Interior, Repair Group 
70
   
     
-  Remove both rear wheels.
     
-  Disconnect exhaust system at clamp and 
remove rear section of exhaust system. 
Pa
ge 22 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3 
         
        
        
     
        
        Page 27 of 32
42-61
 
    
CAUTION! 
Be careful not to damage the edge of the wheelhousing.  -  While coil spring is still compressed, remove bolts (arrows) from 
suspension strut mounting bracket. 
-  Swivel suspension strut outward at top and relieve coil spring tension.
-  Using above procedure, remove suspension strut from opposite side.
-  Remove exhaust system bracket from rear final drive.
    
CAUTION! 
Be careful not to damage the fuel tank.  -  Support final drive using VAG1383A engine/transmission lifter and 
VAG1359/2 universal mount. 
-  Secure rear final drive with strap.
Pa
ge 27 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3 
         
        
        
     
        
        Page 31 of 32
42-64
      
-  Align exhaust system free of stress:
      Repair Manual, Engine Mechanical, Repair 
Group 26  
     
-  Replace four subframe bolts and washers.
     
   Installation position of washers: ribbed side 
facing upward 
     
Tightening torques  
     
Component/location  
Tightening 
torque  
Subframe to body   110 Nm (81 ft 
lb) + 1/4-turn 
(90 )1)  Suspension strut mounting 
bracket to body  55 Nm (41 ft 
lb)  
Drive shaft to rear final 
drive  M8   55 Nm (41 ft 
lb)  
Rear final drive front 
crossmember to body  M10   40 Nm (30 ft 
lb)  
Rear final drive front 
crossmember (with 
exhaust system bracket) 
to body  M8   20 Nm (15 ft 
lb)  
Pa
ge 31 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3