1997 AUDI A4 suspension

40-48


Fig. 1 Removing coil spring
- Clamp VAG1752/2 spring mounting tool in vise.
- Clamp forked end of suspension strut in VAG1752/2 spring mounting
tool.

WARNING!
Make sure coil spring is properly seated in VAG1752/7 spring holder
(arrow). Fig. 2 Removing coil spring, continued
- Using VAG1752/1 tensioning device, compress coil spring until upper
spring plate is free.
Pa
ge 11 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4

40-49


Fig. 3 Removing coil spring, continued
- Remove nut from piston rod (counter-hold with hex wrench).
- Using VAG1752/1 tensioning device, remove components of
suspension strut and compressed coil spring.

The following steps are required to remove the shock absorber: Fig. 4 Replacing shock absorber
- Remove protective cap -1- and lower spring base -2-.
- Using plastic hammer, loosen and remove lower spring plate -3-.
Pa
ge 12 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4

40-51


The 11 positions on the spring plates are always mirror images on
the left and right-hand sides.
Installation position of upper spring plate Fig. 8
. Fig. 7 Installing upper spring plate
-
Set angle scale (arrow) on VAG1752/2 spring mounting tool to 0 .
- Install upper spring plate, washer and suspension strut mount.
- Using VAG1752/8 adjustment gauge for struts, position upper spring
plate to 11 .
The 11 position on the adjustment gauge is indicated by "left-front" or
"right-front"
Pa
ge 14 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4