20-50
Sender for fuel gauge -G, removing and
installing
Vehicles with front wheel drive and 1.8 ltr.
turbo or 2.8 ltr. engine
Observe Safety measures Page 20
-1 .
Observe Rules of cleanliness Page 20
-4 .
Removing
CAUTION!
Obtain the radio Anti-theft code from the
customer before disconnecting the Battery
Ground strap.
- Disconnect Battery Ground strap with ignition switched OFF.
- Open fuel tank cover briefly and close again.
- If necessary, drain fuel tank using fuel cart Page 20
-18
.
Pa
ge 46 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
20-52
Installing
Installation is performed in the reverse order of
the removal procedure, when installing, note the
following:
- Install the sender for fuel gauge in the guide on
the surge housing outer section and press down
until it engages.
- Wrap sender for fuel gauge wiring once around
return line (in tank).
Cover flange, installing Page 20
-45
.
- Connect Ground strap to Battery with ignition
switched OFF.
- After connecting Battery, input radio anti-theft
coding.
Radio operating instructions
- Run door windows up to stop with electric
window lifters.
-
Operate all window lifters again for at least 1
Pa
ge 48 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
