87-150
Fresh air intake duct temperature
sensor -G89-, removing and installing
(1997 )
Remove glovebox
Repair Manual, Body Interior, Repair Group
70
Notes:
- Carefully spray contact surface of rubber grommet -B- with silicone
spray. - Reach in-between heater/air conditioner assembly and bulkhead and
turn sensor -B- 90 (arrow) (connector -C- remains connected).
Temperature sensor -G89- is easily accessible with air flow flow flap
motor -V71- removed. If sensor can not be turned:
- Remove dust and pollen filter page 87
-158
.
- Reach into intake and turn temperature sensor 90 .
After installing, always check DTC memory page 01
-18
.
Electrical test page 01
-115
.
Pa
ge 34 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21
