Page 18 of 43
01-91
      
Work step 4: Kick down function, adapting
1) 
     
1) Only vehicles with automatic transmission  
     
Test requirement:  
     
Engine not running, ignition switched on. 
    
Display on VAS5051:  
Note:  
There will be a prompt: "Operate kick down". 
Note:  
During adaptation of the kick down point, "Kick down ADP in progress" will 
be indicated in display. After successful adaptation of the kick down point, 
"Kick down ADP OK" will be indicated on display.  - 
Press   button 3 times to change into display group 063.-  Depress accelerator pedal completely, past kick down point, and hold 
down. 
-  Check specified value in display field -4-.
Pa
ge 18 of 43 Readiness code11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.7 
         
        
        
     
        
        Page 25 of 43
01-96
      
Work step 6: Diagnostic of oxygen sensor 
aging before catalytic converter 
     
Test requirement:  
     
Engine continues to run at 2600 RPM. 
    
Display on VAS5051:  
Note:  
A few minutes may pass until a diagnostic result is reached.  - 
Press   button 4 times to change into display group 034.-  Check specified value in display field -4-.
Pa
ge 25 of 43 Readiness code11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.7 
         
        
        
     
        
        Page 27 of 43
01-98
      
Work step 7: Diagnostic of operational 
readiness of oxygen sensor behind catalytic 
converter 
     
Test requirement:  
     
Engine continues to run at 2600 RPM. 
    
Display on VAS5051:  
- 
Press   button 2 times to change into display group 036.-  Check specified value in display field -2-.
Pa
ge 27 of 43 Readiness code11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.7 
         
        
        
     
        
        Page 34 of 43
01-105
      
Work step 10: Diagnostic of catalytic 
converter 
     
Test requirement:  
     
Engine continues to run at 2600 RPM. 
    
Display on VAS5051:  
Note:  
Catalytic converter diagnostic lasts approx. 60 seconds.  - 
Press   button 3 times to change into display group 046.-  Check specified values in display fields -2- and -4-.
Pa
ge 34 of 43 Readiness code11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.7