1997 AUDI A4 oil

the silicone layer or the indented area will lead
to leaks.
No oil or coolant must be allowed to remain in
the blind holes for the cylinder head bolts in the
cylinder head.

- Before positioning cylinder head, set crankshaft and camshaft to TDC
of cylinder 1.
Pa
ge 32 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1

15-34

Test conditions:

Engine oil temperature at least 30 C

Battery voltage at least 12.7 V

Test sequence

- Remove engine cover -arrows-.
- Switch ignition off.

- Disconnect connectors -3-.
- Remove ignition coils -1-.
Pa
ge 39 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1

15-36

- Install spark plugs and ignition coils.

Note:
Replace gaskets for ignition coils if damaged.

- Check Diagnostic Trouble Code (DTC)
memory:

Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo Fuel
Injection & Ignition, Engine Code(s): AWM , Repair Group 01


Note:
DTCs will have been recorded in the DTC
memory because the connectors have been
unplugged. Check and, if necessary, erase the
DTC memory after completing the test.

Tightening torques

Component
Nm
Spark plugs in cylinder head 30
Pa
ge 42 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1