19-24
Note:
Connector -2- remains plugged in. - Remove air duct hose -1-.
- Disconnect heater hose at rear of coolant line -2-. To do this, release
retaining clip on connecting flange.
- Pull off coolant hose to oil cooler -4- at coolant line.
- Remove bolt -3-.
- Push lower coolant line toward rear of vehicle and remove.
- Remove plug -5- if necessary.
Pa
ge 27 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
19-30
Note:
To prevent damage to the condenser and
refrigerant lines/hoses, ensure that the lines and
hoses are not stretched, kinked or bent.
Note:
Protect fender panel from damage. - Remove air cowls from radiator -4- (left and right).
- Remove securing bolts -1- and -2- for condenser.
- Disconnect connector -3- from air conditioner pressure switch -F129-.
- Pull condenser up out of its bracket, pivot toward side and secure to
right-hand front wheel with wire.
- Release two retaining pins for radiator and pull out upward -arrows-.
- Pivot radiator toward front and lift out.
Pa
ge 33 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
