Page 30 of 51
24-137
Checking voltage supply of Throttle Position
(TP) sensor
- Remove driver-side storage compartment.
Repair Manual, Body Interior, Repair Group
68; Instrument panel; Driver
-side storage
compartment, removing
- Disconnect harness connector for accelerator
pedal position sensor.
- Switch ignition on.
If specified values are obtained: - Connect multimeter for voltage measurement as follows:Harness connector
Terminal
Specified value
1 + Ground (GND) about 5 V
1 + 5 about 5 V
2 + Ground (GND) about 5 V
2 + 3 about 5 V
Pa
ge 30 of 51 Electronic En
gine Power Control
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4
Page 41 of 51
24-146
If indications do not resemble description:
Check switch
- Remove driver-side storage compartment.
Repair Manual, Body Interior, Repair Group
68; Instrument panel; Driver
-side storage
compartment, removing
- Disconnect harness connector at brake light
switch and brake pedal switch.
If specified values are not obtained: - Connect multimeter between terminal 1 and 2 for resistance
measurement.
Specification: (no continuity)
- Depress accelerator pedal.
Specification: approx. 0
- Connect multimeter between terminal 3 and 4 for resistance
measurement.
Specification: approx. 0
- Depress accelerator pedal.
Specification: (no continuity)
Pa
ge 41 of 51 Electronic En
gine Power Control
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4
Page 48 of 51
24-152
If indications do not resemble description:
Check switch
- Remove driver-side storage compartment.
Repair Manual, Body Interior, Repair Group
68; Instrument panel; Driver
-side storage
compartment, removing
- Disconnect harness connector at Clutch Pedal
Position (CPP) switch.
- Connect multimeter between terminal 1 and 2
for resistance measurement.
Specification: approx. 0
- Depress clutch pedal.
Specification: (no continuity)
If specified value is not obtained:
- Replace Clutch Pedal Position (CPP) switch.
If specified value is obtained:
Pa
ge 48 of 51 Electronic En
gine Power Control
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4
